Zhou Tao, Falaki Ali, Latash Mark L
Department of Kinesiology, The Pennsylvania State University, University Park, PA 16802, USA.
Department of Kinesiology, The Pennsylvania State University, University Park, PA 16802, USA; Moscow Institute of Physics and Technology, Russia.
Hum Mov Sci. 2016 Apr;46:1-9. doi: 10.1016/j.humov.2015.12.002. Epub 2015 Dec 17.
We explored the phenomenon of unintentional movements of a multi-joint effector produced by multiple transient changes in the external force. The subjects performed a position-holding task against a constant bias force produced by a robot and were instructed not to intervene voluntarily with arm movements produced by changes in the robot force. The robot produced a smooth force increase leading to hand movement from the trunk, followed by a dwell time. Then, the force dropped to its initial value leading to hand movement toward the initial position but with an undershot. Such perturbation episodes were repeated four times in a row. The accumulated perturbation and undershoot distances kept increasing without saturation within the sequence of four perturbation episode. The limb apparent stiffness before dwell time increased over sequential perturbations while apparent stiffness after dwell time decreased. We interpret the results as consequences of a drift of the hand referent coordinate (RC) caused by a hypothesized RC-back-coupling mechanism and a coupled drift of the apparent stiffness. The results show that RC-back-coupling continues to lead to unintentional movements over repeated perturbations and is accompanied by a relatively slow re-setting process.
我们探究了由外力的多次瞬态变化所产生的多关节效应器无意运动现象。受试者在对抗机器人产生的恒定偏置力的情况下执行位置保持任务,并被指示不要主动干预由机器人力量变化所引发的手臂运动。机器人产生平稳的力增加,导致手部从躯干处移动,随后是一段停留时间。然后,力降至其初始值,导致手部朝着初始位置移动,但出现了欠调。这样的扰动情节连续重复四次。在四次扰动情节的序列中,累积的扰动和欠调距离持续增加且未达到饱和。停留时间之前肢体的表观刚度随着连续扰动而增加,而停留时间之后的表观刚度则降低。我们将这些结果解释为由假设的参考坐标(RC)回耦机制导致的手部参考坐标(RC)漂移以及表观刚度的耦合漂移所产生的后果。结果表明,RC回耦在重复扰动过程中持续导致无意运动,并伴随着一个相对缓慢的重新设定过程。