Suppr超能文献

全髋关节置换术中三维规划辅助与传统髋臼杯定位的比较:一项随机对照试验

Comparison of Three-Dimensional Planning-Assisted and Conventional Acetabular Cup Positioning in Total Hip Arthroplasty: A Randomized Controlled Trial.

作者信息

Sariali Elhadi, Boukhelifa Nadia, Catonne Yves, Pascal Moussellard Hugues

机构信息

Hôpitaux Universitaires La Pitié Salpêtrière-Charles Foix, AP-HP, Paris, France

INRIA, Saclay, France.

出版信息

J Bone Joint Surg Am. 2016 Jan 20;98(2):108-16. doi: 10.2106/JBJS.N.00753.

Abstract

BACKGROUND

Malpositioning of the acetabular cup during total hip arthroplasty increases the risk of dislocation, edge-loading, squeaking, early wear, and loosening. We hypothesized that the use of three-dimensional (3-D) visualization tools to identify the planned cup position relative to the acetabular edge intraoperatively would increase the accuracy of cup orientation. The purpose of this study was to compare 3-D planning-assisted implantation and freehand insertion of the acetabular cup.

METHODS

This was a prospective randomized controlled study of two groups of twenty-eight patients each. In the first group, cup positioning was guided by 3-D views of the cup within the acetabulum obtained during 3-D preoperative planning. In the control group, the cup was placed freehand. All of the patients were operated on by the same surgeon, through a minimally invasive direct anterior approach with the patient in the supine position. Cup anteversion and abduction angles were measured on 3-D computed tomography (CT) reconstructions. The main evaluation criterion was the percentage of outliers according to the Lewinnek safe zone.

RESULTS

Operative time did not differ between the two groups. The cup anteversion was more accurate in the 3-D planning group (mean difference from the planned angle [and standard deviation], -2.7° ± 5.4°) compared with the freehand-placement group (6.6° ± 9.5°). According to the Lewinnek safe zone, overall, the percentage of outliers was lower in the 3-D planning group (21%; six patients) than in the control group (46%; thirteen patients). According to the Callanan safe zone, the percentage of outliers was also lower in the 3-D planning group (25% versus 64%). Although cup abduction was also restored with greater accuracy in the 3-D planning group, on the basis of the Lewinnek safe zone, the percentage of abduction outliers was comparable between groups, with fewer high-abduction values, but more low-abduction values, in the 3-D planning group.

CONCLUSIONS

Preoperative 3-D planning increased the accuracy of anteversion restoration and reduced the percentage of outliers without increasing the operative time. In this study, the same advantage could not be demonstrated for abduction.

LEVEL OF EVIDENCE

Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

摘要

背景

全髋关节置换术中髋臼杯位置不当会增加脱位、边缘负荷、摩擦、早期磨损和松动的风险。我们假设术中使用三维(3-D)可视化工具来确定计划的髋臼杯相对于髋臼边缘的位置会提高髋臼杯定向的准确性。本研究的目的是比较3-D规划辅助植入和徒手植入髋臼杯。

方法

这是一项前瞻性随机对照研究,每组28例患者。第一组中,髋臼杯的定位由术前3-D规划中获得的髋臼杯在髋臼内的3-D视图引导。对照组中,髋臼杯徒手放置。所有患者均由同一位外科医生通过微创直接前路入路进行手术,患者仰卧位。在3-D计算机断层扫描(CT)重建上测量髋臼杯前倾角和外展角。主要评估标准是根据Lewinnek安全区的异常值百分比。

结果

两组手术时间无差异。与徒手放置组(6.6°±9.5°)相比,3-D规划组的髋臼杯前倾角更准确(与计划角度的平均差值[及标准差],-2.7°±5.4°)。根据Lewinnek安全区,总体而言,3-D规划组的异常值百分比(21%;6例患者)低于对照组(46%;13例患者)。根据Callanan安全区,3-D规划组的异常值百分比也较低(25%对64%)。虽然3-D规划组髋臼杯外展的恢复也更准确,但根据Lewinnek安全区,两组外展异常值百分比相当,3-D规划组高外展值较少,但低外展值较多。

结论

术前3-D规划提高了前倾角恢复的准确性,降低了异常值百分比,且未增加手术时间。在本研究中,外展方面未显示出同样的优势。

证据水平

治疗性I级。有关证据水平的完整描述,请参阅作者须知。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验