Suppr超能文献

批量分析测定含硫固体废弃物中微生物产生的硫化氢。

A batch assay to measure microbial hydrogen sulfide production from sulfur-containing solid wastes.

机构信息

Department of Civil, Construction, and Environmental Engineering, North Carolina State University, Campus Box 7908, Raleigh, NC, USA.

Department of Civil, Construction, and Environmental Engineering, North Carolina State University, Campus Box 7908, Raleigh, NC, USA; Department of Civil and Environmental Engineering, Southern Methodist University, PO Box 750340, Dallas, TX, USA.

出版信息

Sci Total Environ. 2016 May 1;551-552:23-31. doi: 10.1016/j.scitotenv.2016.01.161. Epub 2016 Feb 11.

Abstract

Large volumes of sulfur-containing wastes enter municipal solid waste landfills each year. Under the anaerobic conditions that prevail in landfills, oxidized forms of sulfur, primarily sulfate, are converted to sulfide. Hydrogen sulfide (H2S) is corrosive to landfill gas collection and treatment systems, and its presence in landfill gas often necessitates the installation of expensive removal systems. For landfill operators to understand the cost of managing sulfur-containing wastes, an estimate of the H2S production potential is needed. The objective of this study was to develop and demonstrate a biochemical sulfide potential (BSP) test to measure the amount of H2S produced by different types of sulfur-containing wastes in a relatively fast (30days) and inexpensive (125mL serum bottles) batch assay. This study confirmed the toxic effect of H2S on both sulfate reduction and methane production in batch systems, and demonstrated that removing accumulated H2S by base adsorption was effective for mitigating inhibition. H2S production potentials of coal combustion fly ash, flue gas desulfurization residual, municipal solid waste combustion ash, and construction and demolition waste were determined in BSP assays. After 30days of incubation, most of the sulfate in the wastes was converted to gaseous or aqueous phase sulfide, with BSPs ranging from 0.8 to 58.8mLH2S/g waste, depending on the chemical composition of the samples. Selected samples contained solid phase sulfide which contributed to the measured H2S yield. A 60day incubation in selected samples resulted in 39-86% additional sulfide production. H2S production measured in BSP assays was compared with that measured in simulated landfill reactors and that calculated from chemical analyses. H2S production in BSP assays and in reactors was lower than the stoichiometric values calculated from chemical composition for all wastes tested, demonstrating the importance of assays to estimate the microbial sulfide production potential of sulfur-containing wastes.

摘要

每年都有大量含硫废物进入城市固体废物填埋场。在填埋场中普遍存在的厌氧条件下,氧化形式的硫(主要是硫酸盐)被转化为硫化物。硫化氢(H2S)对填埋气收集和处理系统具有腐蚀性,其存在于填埋气中通常需要安装昂贵的去除系统。为了让填埋场运营商了解管理含硫废物的成本,需要估计 H2S 的产生潜力。本研究旨在开发和验证一种生化硫化物潜力(BSP)测试,以测量不同类型含硫废物在相对快速(30 天)和廉价(125mL 血清瓶)批式测定中产生的 H2S 量。本研究证实了 H2S 对批式系统中硫酸盐还原和甲烷产生的毒性影响,并表明通过碱吸附去除积累的 H2S 可有效缓解抑制作用。在 BSP 测定中确定了煤燃烧飞灰、烟气脱硫残渣、城市固体废物燃烧灰和建筑和拆除废物的 H2S 产生潜力。在 30 天的孵育后,废物中的大部分硫酸盐转化为气态或水相硫化物,BSP 值范围为 0.8 至 58.8mLH2S/g 废物,具体取决于样品的化学成分。选定的样品含有有助于测量 H2S 产率的固相硫化物。在选定的样品中进行 60 天的孵育导致额外产生 39-86%的硫化物。BSP 测定中测量的 H2S 产生量与模拟填埋场反应器中测量的和根据化学分析计算的 H2S 产生量进行了比较。对于所有测试的废物,BSP 测定和反应器中的 H2S 产生量均低于根据化学成分计算的化学计量值,这表明测定在估计含硫废物的微生物硫化物产生潜力方面的重要性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验