[Influence of the Application of Activated Persulfate on Municipal Sludge Conditioning].

The water content of dewatered sewage sludge can decrease at about 80% by traditional sludge dewatering technologies. High water content has negative impacts on the sequent sludge disposal with a stricter standard. The sulfate free radical SO4(*-), generated by activated persulfate, is a powerful oxidant. This article found that it could improve sludge dewatering properties by using the Fe2+ activated sodium persulfate (SPS). The results showed that when using Fe2+ 25.88 mg x g(-1) (based on dry sludge solid) and S2 O8(2-) 80 mg x g(-1) (the mole ratio of Fe2+ to S2 O8(2-) was 1.1 : 1) for sludge conditioning, it could reduce the capillary suction time (CST) and specific resistance to filtration (RSF) of sludge, increased the protein and ploysaccharide as well as the COD concentration in the filtrate. The further research showed that this method could change the zeta potential of sludge, increased the sludge particle specific surface area, and made flocs become a loose layered structure from dense clusters, which was beneficial to improve the sludge dewaterability.