Joo Sung Kyun, Lee In-Gu, Lee Hyung Won, Chea Kwang-Seok, Jo Tae Su, Jung Sang-Chul, Kim Sang Chai, Ko Chang Hyun, Park Young-Kwon
J Nanosci Nanotechnol. 2016 Feb;16(2):1616-9. doi: 10.1166/jnn.2016.12011.
Catalytic pyrolysis experiments were conducted to investigate the possibility of obtaining valuable chemicals from Pinus densiflora, a native Korean tree species occupying 21.4% of the total area under forests in South Korea. Two representative mesoporous catalysts, Al-MCM-41 and Al-MSU-F, as well as hierarchical mesoporous MFI (Meso-MFI) that has both mesopores and micropores, were used as catalysts. Compared to non-catalytic pyrolysis, catalytic pyrolysis was shown to reduce the fractions of levoglucosan, phenolics, and acids in bio-oil, while increasing the fractions of aromatics, PAHs, and furans. Meso-MFI with strong acid sites showed a high selectivity toward aromatics and PAHs, whereas Al-MCM-41 and Al-MSU-F with weak acid sites exhibited a high selectivity toward furanic compounds. The results of this study indicate that choosing a catalyst with an adequate quantity of acidic sites with the required strength is critical for enhancing the production of desired chemicals from Pinus densiflora.
进行了催化热解实验,以研究从韩国本土树种松树中获取有价值化学品的可能性,松树在韩国森林总面积中占21.4%。使用了两种具有代表性的介孔催化剂Al-MCM-41和Al-MSU-F,以及同时具有介孔和微孔的分级介孔MFI(中孔MFI)作为催化剂。与非催化热解相比,催化热解显示出可降低生物油中左旋葡聚糖、酚类和酸的含量,同时增加芳烃、多环芳烃和呋喃的含量。具有强酸位点的中孔MFI对芳烃和多环芳烃具有高选择性,而具有弱酸位点的Al-MCM-41和Al-MSU-F对呋喃类化合物具有高选择性。本研究结果表明,选择具有适量所需强度酸性位点的催化剂对于提高从松树中生产所需化学品至关重要。