Rana V K, Rudin S, Bednarek D R
Toshiba Stroke and Vascular Research Center, Department of Neurosurgery, State University of New York at Buffalo, Buffalo, New York 14203.
Toshiba Stroke and Vascular Research Center, Departments of Radiology, Neurosurgery, Physiology and Biophysics, State University of New York at Buffalo, Buffalo, New York 14203.
Med Phys. 2016 Sep;43(9):5131. doi: 10.1118/1.4960368.
Neurovascular interventional procedures using biplane fluoroscopic imaging systems can lead to increased risk of radiation-induced skin injuries. The authors developed a biplane dose tracking system (Biplane-DTS) to calculate the cumulative skin dose distribution from the frontal and lateral x-ray tubes and display it in real-time as a color-coded map on a 3D graphic of the patient for immediate feedback to the physician. The agreement of the calculated values with the dose measured on phantoms was evaluated.
The Biplane-DTS consists of multiple components including 3D graphic models of the imaging system and patient, an interactive graphical user interface, a data acquisition module to collect geometry and exposure parameters, the computer graphics processing unit, and functions for determining which parts of the patient graphic skin surface are within the beam and for calculating dose. The dose is calculated to individual points on the patient graphic using premeasured calibration files of entrance skin dose per mAs including backscatter; corrections are applied for field area, distance from the focal spot and patient table and pad attenuation when appropriate. The agreement of the calculated patient skin dose and its spatial distribution with measured values was evaluated in 2D and 3D for simulated procedure conditions using a PMMA block phantom and an SK-150 head phantom, respectively. Dose values calculated by the Biplane-DTS were compared to the measurements made on the phantom surface with radiochromic film and a calibrated ionization chamber, which was also used to calibrate the DTS. The agreement with measurements was specifically evaluated with variation in kVp, gantry angle, and field size.
The dose tracking system that was developed is able to acquire data from the two x-ray gantries on a biplane imaging system and calculate the skin dose for each exposure pulse to those vertices of a patient graphic that are determined to be in the beam. The calculations are done in real-time with a typical graphic update time of 30 ms and an average vertex separation of 3 mm. With appropriate corrections applied, the Biplane-DTS was able to determine the entrance dose within 6% and the spatial distribution of the dose within 4% compared to the measurements with the ionization chamber and film for the SK150 head phantom. The cumulative dose for overlapping fields from both gantries showed similar agreement.
The Biplane-DTS can provide a good estimate of the peak skin dose and cumulative skin dose distribution during biplane neurointerventional procedures. Real-time display of this information should help the physician manage patient dose to reduce the risk of radiation-induced skin injuries.
使用双平面荧光透视成像系统进行神经血管介入手术会增加辐射导致皮肤损伤的风险。作者开发了一种双平面剂量跟踪系统(Biplane-DTS),用于计算来自前后位和侧位X射线管的累积皮肤剂量分布,并将其作为彩色编码图实时显示在患者的三维图形上,以便立即向医生提供反馈。评估了计算值与在体模上测量的剂量之间的一致性。
Biplane-DTS由多个组件组成,包括成像系统和患者的三维图形模型、交互式图形用户界面、用于收集几何形状和曝光参数的数据采集模块、计算机图形处理单元,以及用于确定患者图形皮肤表面哪些部分在射束内并计算剂量的功能。使用预先测量的每毫安秒入射皮肤剂量(包括反向散射)的校准文件,计算患者图形上各个点的剂量;在适当时,对射野面积、距焦点和患者检查床的距离以及垫子衰减进行校正。分别使用PMMA模块体模和SK-150头部体模,在二维和三维中针对模拟手术条件评估计算出的患者皮肤剂量及其空间分布与测量值的一致性。将Biplane-DTS计算的剂量值与使用放射变色胶片和校准电离室在体模表面进行的测量值进行比较,校准电离室也用于校准DTS。特别评估了在千伏峰值、机架角度和射野大小变化时与测量值的一致性。
所开发的剂量跟踪系统能够从双平面成像系统的两个X射线机架获取数据,并计算每次曝光脉冲对确定在射束内的患者图形顶点的皮肤剂量。计算实时完成,典型的图形更新时间为30毫秒,平均顶点间距为3毫米。经过适当校正后,与使用SK150头部体模的电离室和胶片测量结果相比,Biplane-DTS能够确定入射剂量在6%以内,剂量的空间分布在4%以内。来自两个机架的重叠射野的累积剂量显示出类似的一致性。
Biplane-DTS能够在双平面神经介入手术期间很好地估计峰值皮肤剂量和累积皮肤剂量分布。实时显示这些信息应有助于医生管理患者剂量,以降低辐射导致皮肤损伤的风险。