German Federal Institute for Risk Assessment (BfR), Department of Chemical and Product Safety, Max-Dohrn-Strasse 8-10, 10589 Berlin, Germany.
German Federal Institute for Risk Assessment (BfR), Department of Chemical and Product Safety, Max-Dohrn-Strasse 8-10, 10589 Berlin, Germany.
Int J Hyg Environ Health. 2016 Nov;219(8):780-791. doi: 10.1016/j.ijheh.2016.09.002. Epub 2016 Sep 4.
According to European legislation, tobacco additives may not increase the toxicity or the addictive potency of the product, but there is an ongoing debate on how to reliably characterize and measure such properties. Further, too little is known on pyrolysis patterns of tobacco additives to assume that no additional toxicological risks need to be suspected. An on-line pyrolysis technique was used and coupled to gas chromatography-mass spectrometry (GC/MS) to identify the pattern of chemical species formed upon thermal decomposition of 19 different tobacco additives like raw cane sugar, licorice or cocoa. To simulate the combustion of a cigarette it was necessary to perform pyrolysis at inert conditions as well as under oxygen supply. All individual additives were pyrolyzed under inert or oxidative conditions at 350, 700 and 1000°C, respectively, and the formation of different toxicants was monitored. We observed the generation of vinyl acrylate, fumaronitrile, methacrylic anhydride, isobutyric anhydride and 3-buten-2-ol exclusively during pyrolysis of tobacco additives. According to the literature, these toxicants so far remained undetectable in tobacco or tobacco smoke. Further, the formation of 20 selected polycyclic aromatic hydrocarbons (PAHs) with molecular weights of up to 278Da was monitored during pyrolysis of cocoa in a semi-quantitative approach. It was shown that the adding of cocoa to tobacco had no influence on the relative amounts of the PAHs formed.
根据欧洲法规,烟草添加剂不得增加产品的毒性或成瘾效力,但对于如何可靠地描述和测量这些特性,目前仍存在争议。此外,对于烟草添加剂的热解模式知之甚少,因此不能假定不存在额外的毒理学风险。本研究采用在线热解技术,并与气相色谱-质谱联用(GC/MS)相结合,以鉴定 19 种不同烟草添加剂(如原蔗糖、甘草或可可)在热解过程中形成的化学物质的模式。为了模拟香烟的燃烧,有必要在惰性条件和供氧条件下进行热解。分别在惰性或氧化条件下将所有单个添加剂在 350、700 和 1000°C 下进行热解,并监测不同毒物的形成情况。我们观察到,在烟草添加剂的热解过程中,仅生成丙烯醛、丙烯腈、甲基丙烯醛、异丁酐和 3-丁烯-2-醇。根据文献,到目前为止,这些毒物在烟草或香烟烟雾中仍然无法检测到。此外,采用半定量方法监测了可可在热解过程中形成的 20 种分子量高达 278Da 的多环芳烃(PAHs)。结果表明,可可添加到烟草中对形成的 PAHs 的相对含量没有影响。