Marathe Shashidhara, Shi Xianbo, Wojcik Michael J, Macrander Albert T, Assoufid Lahsen
X-ray Science Division, Advanced Photon Source, Argonne National Laboratory; Division of Science, Diamond Light Source Ltd.
X-ray Science Division, Advanced Photon Source, Argonne National Laboratory.
J Vis Exp. 2016 Oct 11(116):53025. doi: 10.3791/53025.
A procedure for a technique to measure the transverse coherence of synchrotron radiation X-ray sources using a single phase grating interferometer is reported. The measurements were demonstrated at the 1-BM bending magnet beamline of the Advanced Photon Source (APS) at Argonne National Laboratory (ANL). By using a 2-D checkerboard π/2 phase-shift grating, transverse coherence lengths were obtained along the vertical and horizontal directions as well as along the 45° and 135° directions to the horizontal direction. Following the technical details specified in this paper, interferograms were measured at different positions downstream of the phase grating along the beam propagation direction. Visibility values of each interferogram were extracted from analyzing harmonic peaks in its Fourier Transformed image. Consequently, the coherence length along each direction can be extracted from the evolution of visibility as a function of the grating-to-detector distance. The simultaneous measurement of coherence lengths in four directions helped identify the elliptical shape of the coherence area of the Gaussian-shaped X-ray source. The reported technique for multiple-direction coherence characterization is important for selecting the appropriate sample size and orientation as well as for correcting the partial coherence effects in coherence scattering experiments. This technique can also be applied for assessing coherence preserving capabilities of X-ray optics.
报道了一种使用单相光栅干涉仪测量同步辐射X射线源横向相干性的技术流程。这些测量是在阿贡国家实验室(ANL)的先进光子源(APS)的1-BM弯曲磁铁光束线上进行的。通过使用二维棋盘格π/2相移光栅,在垂直和水平方向以及相对于水平方向45°和135°方向上获得了横向相干长度。按照本文规定的技术细节,沿着光束传播方向在相位光栅下游的不同位置测量干涉图。通过分析其傅里叶变换图像中的谐波峰值来提取每个干涉图的可见度值。因此,沿着每个方向的相干长度可以从可见度随光栅到探测器距离的变化中提取出来。四个方向上相干长度的同时测量有助于识别高斯形X射线源相干区域的椭圆形状。所报道的多方向相干表征技术对于选择合适的样品尺寸和取向以及校正相干散射实验中的部分相干效应很重要。该技术还可用于评估X射线光学元件的相干保持能力。