Suppr超能文献

用于纳米颗粒呼吸道沉积采样器的非织造织物。

Nonwoven textile for use in a nanoparticle respiratory deposition sampler.

作者信息

Vosburgh Donna J H, Park Jae Hong, Mines Levi W D, Mudunkotuwa Imali A, Anthony T Renée, Peters Thomas M

机构信息

a Department of Occupational and Environmental Safety and Health , University of Wisconsin-Whitewater , Whitewater , Wisconsin.

b School of Health Sciences , Purdue University , West Lafayette , Indiana.

出版信息

J Occup Environ Hyg. 2017 May;14(5):368-376. doi: 10.1080/15459624.2016.1263391.

Abstract

The nanoparticle respiratory deposition (NRD) sampler is a personal sampler that combines a cyclone, impactor, and a nylon mesh diffusion stage to measure a worker's exposure to nanoparticles. The concentration of titanium in the nylon mesh of the diffusion stage complicates the application of the NRD sampler for assessing exposures to titanium dioxide nanoparticles. This study evaluated commercially available nonwoven textiles for use as an alternative media in the diffusion stage of the NRD sampler. Three textiles were selected as containing little titanium from an initial screening of 11 textiles by field portable x-ray fluorescence (FPXRF). Further evaluation on these three textiles was conducted to determine the concentration of titanium and other metals by inductively coupled plasma-optical emission spectroscopy (ICP-OES), the number of layers required to achieve desired collection characteristics for use as the diffusion stage in the NRD sampler (i.e., the nanoparticulate matter, NPM, criterion), and the pressure drop associated with that number of layers.  Only three (two composed of cotton fibers, C1 and C2; and one of viscose bamboo and cotton fibers, BC) of 11 textiles screened had titanium concentrations below the limit of detection the XRF device (0.15 µg/cm). Multiple metals, including small amounts of titanium, were found in each of the three nonwoven textiles using ICP-OES. The number of 25-mm-diameter layers required to achieve the collection efficiency by size required for the NRD sampler was three for C1 (R = 0.95 with reference to the NPM criterion), two for C2 (R = 0.79), and three for BC (R = 0.87). All measured pressure drops were less than theoretical and even the greatest pressure drop of 65.4 Pa indicated that a typical personal sampling pump could accommodate any of the three nonwoven textiles in the NRD sampler. The titanium concentration, collection efficiency, and measured pressure drops show there is a potential for nonwoven textiles to be used as the diffusion stage of the NRD sampler.

摘要

纳米颗粒呼吸沉积(NRD)采样器是一种个人采样器,它结合了旋风分离器、冲击器和尼龙网扩散阶段,用于测量工人对纳米颗粒的暴露情况。扩散阶段尼龙网中钛的浓度使NRD采样器在评估二氧化钛纳米颗粒暴露方面的应用变得复杂。本研究评估了市售非织造织物作为NRD采样器扩散阶段的替代介质。通过现场便携式X射线荧光光谱仪(FPXRF)对11种织物进行初步筛选,选择了三种含钛量低的织物。对这三种织物进行了进一步评估,以通过电感耦合等离子体发射光谱法(ICP-OES)测定钛和其他金属的浓度、作为NRD采样器扩散阶段使用时达到所需收集特性所需的层数(即纳米颗粒物,NPM,标准)以及与该层数相关的压降。在筛选的11种织物中,只有三种(两种由棉纤维组成,C1和C2;一种由粘胶竹纤维和棉纤维组成,BC)的钛浓度低于XRF设备的检测限(0.15μg/cm)。使用ICP-OES在三种非织造织物中均发现了多种金属,包括少量钛。对于C1,达到NRD采样器所需尺寸收集效率所需的25毫米直径层数为三层(相对于NPM标准,R = 0.95),对于C2为两层(R = 0.79),对于BC为三层(R = 0.87)。所有测量的压降均小于理论值(压降),甚至最大压降65.4 Pa表明典型的个人采样泵可以适应NRD采样器中的三种非织造织物中的任何一种。钛浓度、收集效率和测量的压降表明非织造织物有潜力用作NRD采样器的扩散阶段。

相似文献

1
Nonwoven textile for use in a nanoparticle respiratory deposition sampler.
J Occup Environ Hyg. 2017 May;14(5):368-376. doi: 10.1080/15459624.2016.1263391.
3
Design and Evaluation of a High-Flowrate Nanoparticle Respiratory Deposition (NRD) Sampler.
J Aerosol Sci. 2019 Aug;134:72-79. doi: 10.1016/j.jaerosci.2019.04.019.
6
A personal nanoparticle respiratory deposition (NRD) sampler.
Environ Sci Technol. 2011 Aug 1;45(15):6483-90. doi: 10.1021/es201379a. Epub 2011 Jul 13.
7
Porous Polyurethane Foam for Use as a Particle Collection Substrate in a Nanoparticle Respiratory Deposition Sampler.
Aerosol Sci Technol. 2016;50(5):497-506. doi: 10.1080/02786826.2016.1164828. Epub 2016 Mar 16.
8
A novel method for assessing respiratory deposition of welding fume nanoparticles.
J Occup Environ Hyg. 2014;11(12):771-80. doi: 10.1080/15459624.2014.919393.
9
Evaluation of a novel personal nanoparticle sampler.
Environ Sci Process Impacts. 2014 Feb;16(2):203-10. doi: 10.1039/c3em00497j.

本文引用的文献

1
Porous Polyurethane Foam for Use as a Particle Collection Substrate in a Nanoparticle Respiratory Deposition Sampler.
Aerosol Sci Technol. 2016;50(5):497-506. doi: 10.1080/02786826.2016.1164828. Epub 2016 Mar 16.
2
A Granular Bed for Use in a Nanoparticle Respiratory Deposition Sampler.
Aerosol Sci Technol. 2015;49(3):179-187. doi: 10.1080/02786826.2015.1013521. Epub 2015 Feb 3.
4
A novel method for assessing respiratory deposition of welding fume nanoparticles.
J Occup Environ Hyg. 2014;11(12):771-80. doi: 10.1080/15459624.2014.919393.
5
Tortuously structured polyvinyl chloride/polyurethane fibrous membranes for high-efficiency fine particulate filtration.
J Colloid Interface Sci. 2013 May 15;398:240-6. doi: 10.1016/j.jcis.2013.02.019. Epub 2013 Feb 22.
6
A strategy for assessing workplace exposures to nanomaterials.
J Occup Environ Hyg. 2011 Nov;8(11):673-85. doi: 10.1080/15459624.2011.623223.
7
A personal nanoparticle respiratory deposition (NRD) sampler.
Environ Sci Technol. 2011 Aug 1;45(15):6483-90. doi: 10.1021/es201379a. Epub 2011 Jul 13.

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验