Wu Xiaoli, Li Ji-Guang, Li Jinkai, Zhu Qi, Li Xiaodong, Sun Xudong, Sakka Yoshio
Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Materials and Metallurgy, Northeastern University, Shenyang, Liaoning 110004, China; Advanced Materials Processing Unit, National Institute for Materials Science, Sengen 1-2-1, Tsukuba, Ibaraki 305-0047, Japan.
Key Laboratory for Anisotropy and Texture of Materials (Ministry of Education), School of Materials and Metallurgy, Northeastern University, Shenyang, Liaoning 110004, China.
Sci Technol Adv Mater. 2013 Feb 21;14(1):015006. doi: 10.1088/1468-6996/14/1/015006. eCollection 2013 Feb.
Well-crystallized (Y TbEu )(OH)NO·HO ( = 0-0.03) layered rare-earth hydroxide (LRH) nanoflakes of a pure high-hydration phase have been produced by autoclaving from the nitrate/NHOH reaction system under the optimized conditions of 100 °C and pH ∼7.0. The flakes were then converted into (Y TbEu )O phosphor nanoplates with color-tunable photoluminescence. Detailed structural characterizations confirmed that LRH solid solutions contained NO anions intercalated between the layers. Characteristic Tb and Eu emissions were detected in the ternary LRHs by selectively exciting the two types of activators, and the energy transfer from Tb to Eu was observed. Annealing the LRHs at 1100 °C produced cubic-lattice (Y TbEu )O solid-solution nanoplates with exposed 222 facets. Multicolor, intensity-adjustable luminescence was attained by varying the excitation wavelength from ∼249 nm (the charge transfer excitation band of Eu) to 278 nm (the 4f-4f5d transition of Tb). Unitizing the efficient Tb to Eu energy transfer, the emission color of (Y TbEu )O was tuned from approximately green to yellowish-orange by varying the Eu/Tb ratio. At the optimal Eu content of = 0.01, the efficiency of energy transfer was ∼91% and the transfer mechanism was suggested to be electric multipole interactions. The phosphor nanoplates developed in this work may be incorporated in luminescent films and find various lighting and display applications.
在100°C和pH值约为7.0的优化条件下,通过对硝酸盐/氢氧化铵反应体系进行高压灭菌,制备出了结晶良好的(Y TbEu )(OH)NO·H₂O(x = 0 - 0.03)纯高水合相层状稀土氢氧化物(LRH)纳米片。然后将这些薄片转化为具有颜色可调光致发光的(Y TbEu )O磷光体纳米板。详细的结构表征证实,LRH固溶体在层间含有插层的NO₃⁻阴离子。通过选择性激发两种类型的激活剂,在三元LRH中检测到了特征性的Tb和Eu发射,并观察到了从Tb到Eu的能量转移。在1100°C下对LRH进行退火处理,得到了具有暴露的{222}晶面的立方晶格(Y TbEu )O固溶体纳米板。通过将激发波长从约249 nm(Eu的电荷转移激发带)变化到278 nm(Tb的4f - 4f5d跃迁),实现了多色、强度可调的发光。利用高效的Tb到Eu的能量转移,通过改变Eu/Tb比,将(Y TbEu )O的发射颜色从近似绿色调至黄橙色。在Eu的最佳含量x = 0.01时,能量转移效率约为91%,转移机制被认为是电多极相互作用。这项工作中开发的磷光体纳米板可被整合到发光薄膜中,并可用于各种照明和显示应用。