School of Chemistry, Indian Institute of Science Education and Research Thiruvananthapuram , CET Campus, Thiruvananthapuram, Kerala 695016, India.
J Am Chem Soc. 2017 Feb 1;139(4):1584-1589. doi: 10.1021/jacs.6b11549. Epub 2017 Jan 19.
Though topochemical reactions are attractive, the difficulty associated with crystallization such as low yield, unsuitability for large-scale synthesis, etc. warranted the exploitation of other self-assembled media for topochemical reactions. We synthesized a dipeptide gelator decorated with azide and alkyne at its termini, N-Ala-Val-NHCH-C≡CH, which is designed to self-assemble through intermolecular hydrogen bonds to β-sheets thereby placing the azide and alkyne motifs in proximity. As anticipated, this peptide forms gels in organic solvents and water via hydrogen-bonded β-sheet assembly as evidenced from IR spectroscopy and PXRD profiling. The microscopic fibers present in organogel and hydrogel have different morphology as was evident from scanning electron microscopy (SEM) imaging of their xerogels, XG (xerogel made from hydrogel) and XG (xerogel made from organogel). Heating of xerogels at 80 °C resulted in the topochemical azide-alkyne cycloaddition (TAAC) polymerization to 1,4-triazole-linked oligopeptides. Under identical conditions, XG produced larger oligopeptides, and XG produced smaller peptides, as evidenced from MALDI-TOF spectrometry. We have also shown that degree of TAAC polymerization can be controlled by changing gel fiber thickness, which in turn can be controlled by concentration. SEM studies suggested the morphological intactness of the fibers even after the reaction, and their PXRD profiles revealed that both XG and XG undergo fiber-to-fiber oligomerization without losing their crystallinity. In contrast to crystals, the xerogels undergo TAAC polymerization in two distinct stages as shown by DSC analyses. Interestingly, XG and XG undergo spontaneous TAAC polymerization at room temperature; the latter shows faster kinetics. This is not only the first demonstration of the use of xerogels for thermally induced topochemical polymerization but also the first report on a spontaneous topochemical reaction in xerogels.
虽然拓扑化学反应很有吸引力,但结晶过程中存在的困难,如产率低、不适合大规模合成等,使得需要开发其他自组装介质来进行拓扑化学反应。我们合成了一种二肽凝胶剂,其末端带有叠氮化物和炔基,即 N-Ala-Val-NHCH-C≡CH,设计通过分子间氢键自组装形成 β-折叠片,从而使叠氮化物和炔基基序靠近。正如预期的那样,这种肽在有机溶剂和水中通过氢键β-折叠片组装形成凝胶,这可以从红外光谱和 PXRD 分析中得到证明。有机凝胶和水凝胶中的微观纤维具有不同的形态,这从它们的干凝胶(xerogel)、XG(水凝胶制成的干凝胶)和 XG(有机凝胶制成的干凝胶)的扫描电子显微镜(SEM)成像中可以明显看出。在 80°C 下加热干凝胶会导致拓扑叠氮-炔环加成(TAAC)聚合形成 1,4-三唑连接的寡肽。在相同条件下,XG 产生了较大的寡肽,而 XG 产生了较小的肽,这可以从 MALDI-TOF 光谱中得到证明。我们还表明,TAAC 聚合度可以通过改变凝胶纤维厚度来控制,而纤维厚度又可以通过浓度来控制。SEM 研究表明,即使在反应后纤维的形态完整性也得以保持,其 PXRD 图谱显示,XG 和 XG 都经历了纤维间的低聚物化,而没有失去其结晶度。与晶体不同,干凝胶在 DSC 分析中显示出两个不同的 TAAC 聚合阶段。有趣的是,XG 和 XG 在室温下自发进行 TAAC 聚合,后者表现出更快的动力学。这不仅是首次将干凝胶用于热诱导拓扑聚合的演示,也是首次报道干凝胶中的自发拓扑反应。