Yang Haisheng, Embry Rachel E, Main Russell P
Musculoskeletal Biology and Mechanics Lab, Department of Basic Medical Sciences, Purdue University, West Lafayette, Indiana, United States of America.
Weldon School of Biomedical Engineering, Purdue University, West Lafayette, Indiana, United States of America.
PLoS One. 2017 Jan 11;12(1):e0169519. doi: 10.1371/journal.pone.0169519. eCollection 2017.
The skeleton's osteogenic response to mechanical loading can be affected by loading duration and rest insertion during a series of loading events. Prior animal loading studies have shown that the cortical bone response saturates quickly and short rest insertions between load cycles can enhance cortical bone formation. However, it remains unknown how loading duration and short rest insertion affect load-induced osteogenesis in the mouse tibial compressive loading model, and particularly in cancellous bone. To address this issue, we applied cyclic loading (-9 N peak load; 4 Hz) to the tibiae of three groups of 16 week-old female C57BL/6 mice for two weeks, with a different number of continuous load cycles applied daily to each group (36, 216 and 1200). A fourth group was loaded under 216 daily load cycles with a 10 s rest insertion after every fourth cycle. We found that as few as 36 load cycles per day were able to induce osteogenic responses in both cancellous and cortical bone. Furthermore, while cortical bone area and thickness continued to increase through 1200 cycles, the incremental increase in the osteogenic response decreased as load number increased, indicating a reduced benefit of the increasing number of load cycles. In the proximal metaphyseal cancellous bone, trabecular thickness increased with load up to 216 cycles. We also found that insertion of a 10 s rest between load cycles did not improve the osteogenic response of the cortical or cancellous tissues compared to continuous loading in this model given the age and sex of the mice and the loading parameters used here. These results suggest that relatively few load cycles (e.g. 36) are sufficient to induce osteogenic responses in both cortical and cancellous bone in the mouse tibial loading model. Mechanistic studies using the mouse tibial loading model to examine bone formation and skeletal mechanobiology could be accomplished with relatively few load cycles.
在一系列加载事件中,骨骼对机械负荷的成骨反应会受到加载持续时间和休息间隔的影响。先前的动物加载研究表明,皮质骨反应很快就会饱和,并且在负荷周期之间插入短暂的休息时间可以增强皮质骨的形成。然而,在小鼠胫骨压缩加载模型中,尤其是在松质骨中,加载持续时间和短暂休息间隔如何影响负荷诱导的成骨作用仍然未知。为了解决这个问题,我们对三组16周龄雌性C57BL/6小鼠的胫骨施加循环负荷(峰值负荷-9 N;4 Hz),持续两周,每组每天施加不同数量的连续负荷周期(36、216和1200)。第四组在每天216个负荷周期下加载,每第四个周期后插入10秒的休息时间。我们发现,每天仅36个负荷周期就能在松质骨和皮质骨中诱导成骨反应。此外,虽然皮质骨面积和厚度在1200个周期内持续增加,但随着负荷次数的增加,成骨反应的增量增加减少,这表明负荷周期数量增加带来的益处减少。在近端干骺端松质骨中,小梁厚度随着负荷增加至216个周期而增加。我们还发现,考虑到小鼠的年龄、性别以及此处使用的加载参数,与该模型中的连续加载相比,在负荷周期之间插入10秒的休息时间并不能改善皮质或松质组织的成骨反应。这些结果表明,在小鼠胫骨加载模型中,相对较少的负荷周期(例如36个)就足以在皮质骨和松质骨中诱导成骨反应。使用小鼠胫骨加载模型来研究骨形成和骨骼力学生物学的机制研究可以通过相对较少的负荷周期来完成。