阿斯帕玻璃离子水门汀的最终表面质地、耐磨性及孔隙率

Finished surface texture, abrasion resistance, and porosity of Aspa glass-ionomer cement.

Smales R, Joyce K

J Prosthet Dent. 1978 Nov;40(5):549-53. doi: 10.1016/0022-3913(78)90091-4.

Abstract

With the finishing agents tested Concise had a smoother surface texture than Aspa. 2. The smoothest surface was on Concise polymerized against a Mylar matrix strip. The smoothest surface for Aspa was obtained with a silicon carbide disk. 3. Aspa abraded about three times as rapidly by volume as Concise when tested by a two-body abrasion method. 4. Significantly more air bubbles were entrapped by hand mixing within Aspa than within Concise. 5. Controlled clinical studies of the glass-ionomer cements are needed before they can be fully evaluated as restorative materials.

摘要

在所测试的处理剂中，Concise的表面质地比Aspa更光滑。2. 当与聚酯薄膜基质条聚合时，Concise的表面最光滑。Aspa最光滑的表面是用碳化硅盘获得的。3. 通过双体磨损法测试时，Aspa的磨损体积约为Concise的三倍。4. 手工搅拌时，Aspa中截留的气泡明显多于Concise。5. 在将玻璃离子水门汀作为修复材料进行全面评估之前，需要进行对照临床研究。