Suppr超能文献

比较不同粘结剂厚度下纤维增强复合材料树脂桩的推出强度。

Comparison of push-out bond strength of fiber-reinforced composite resin posts according to cement thickness.

机构信息

Resident, Department of Conservative Dentistry, Wonju Severance Christian Hospital, Wonju College of Medicine, Yonsei University, Wonju, Republic of Korea.

Assistant Professor, Department of Orthodontics, Wonju Severance Christian Hospital, Wonju College of Medicine, Yonsei University, Wonju, Republic of Korea.

出版信息

J Prosthet Dent. 2017 Sep;118(3):372-378. doi: 10.1016/j.prosdent.2016.11.007. Epub 2017 Feb 20.

Abstract

STATEMENT OF PROBLEM

Post space size and cement thickness can differ because of variations in root canal morphology, such as an oval shape, and because the entire canal space cannot be included in the post space preparation. As a result, increased cement thickness around the post may affect the bond strength between the post and the dentin.

PURPOSE

The purpose of this in vitro study was to evaluate the push-out bond strength of fiber-reinforced composite resin posts to root dentin with cement layers of varying thickness.

MATERIAL AND METHODS

Thirty human premolars were endodontically treated and restored with fiber-reinforced composite resin posts. Post space was prepared using a drill with a 1.5-mm diameter and diameters of 1.25 mm (small [S] group), 1.375 mm (medium [M] group), and 1.5 mm (large [L] group) were cemented. The specimens were sectioned horizontally into 1-mm-thick slices, and the push-out bond strengths of the apical and coronal fragments were evaluated. Bond strength was compared using analysis of variance and 2-sample t tests (α=.05).

RESULTS

No significant differences were found in the debonding force and push-out bond strength among fiber-reinforced composite posts of different sizes (P>.05). The mean debonding force and standard deviation of the posts were 25.05 ±9.52 N for the S group, 28.17 ±11.38 N for the M group, and 33.78 ±12.47 N for the L group. The corresponding push-out bond strength values were 3.11 ±1.54 MPa, 3.39 ±1.4 MPa, and 4.15 ±1.75 MPa. The differences in debonding force between the apical (26.43 ±10.72 N) and coronal (31.57 ±12.03 N) areas were not significant (P>.05). However, the differences in push-out bond strength between the apical (4.27 ±1.73 MPa) and coronal areas (2.83 ±1.08 MPa) were significant (P<.05).

CONCLUSIONS

The widening of post spaces and, consequently, the increased cement thickness do not significantly affect the bond strength of fiber-reinforced composite resin posts to root dentin.

摘要

问题陈述

由于根管形态的变化,如椭圆形,以及由于不能将整个根管空间纳入根管预备中,因此,后牙根管内的空间大小和水泥厚度可能会有所不同。因此,增加后牙周围的水泥厚度可能会影响桩与牙本质之间的粘结强度。

目的

本体外研究的目的是评估不同厚度水泥层对纤维增强复合树脂桩与根管牙本质的推出粘结强度。

材料和方法

30 颗人前磨牙进行根管治疗并用纤维增强复合树脂桩修复。使用直径为 1.5mm 的钻头制备桩腔,并用直径为 1.25mm(小[S]组)、1.375mm(中[M]组)和 1.5mm(大[L]组)的钻头扩大桩腔。将标本水平切成 1mm 厚的切片,评估根尖和冠部碎片的推出粘结强度。使用方差分析和 2 样本 t 检验(α=.05)比较粘结强度。

结果

不同尺寸纤维增强复合树脂桩的脱位力和推出粘结强度无显著差异(P>.05)。S 组、M 组和 L 组的平均脱位力和标准偏差分别为 25.05±9.52N、28.17±11.38N 和 33.78±12.47N。相应的推出粘结强度值分别为 3.11±1.54MPa、3.39±1.4MPa 和 4.15±1.75MPa。根尖(26.43±10.72N)和冠部(31.57±12.03N)区域的脱位力差异无统计学意义(P>.05)。然而,根尖(4.27±1.73MPa)和冠部(2.83±1.08MPa)区域的推出粘结强度差异有统计学意义(P<.05)。

结论

扩大桩腔并相应增加水泥厚度不会显著影响纤维增强复合树脂桩与根管牙本质的粘结强度。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验