Ma Xuetian, An Ke, Bai Jianming, Chen Hailong
The Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
Chemical and Engineering Materials Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831, USA.
Sci Rep. 2017 Mar 13;7(1):162. doi: 10.1038/s41598-017-00202-y.
Sodium ion batteries are being considered as an alternative to lithium ion batteries in large-scale energy storage applications owing to the low cost. A novel titanate compound, NaAlTiO, was successfully synthesized and tested as a promising anode material for sodium ion batteries. Powder X-ray Diffraction (XRD) and refinement were used to analyze the crystal structure. Electrochemical cycling tests under a C/10 rate between 0.01 - 2.5 V showed that ~83 mAh/g capacity could be achieved in the second cycle, with ~75% of which retained after 100 cycles, which corresponds to 0.75 Na insertion and extraction. The influence of synthesis conditions on electrochemical performances was investigated and discussed. NaAlTiO not only presents a new anode material with low average voltage of ~0.5 V, but also provides a new type of intercalation anode with a crystal structure that differentiates from the anodes that have been reported.
由于成本较低,钠离子电池正被视为大规模储能应用中锂离子电池的替代品。一种新型钛酸盐化合物NaAlTiO被成功合成,并作为一种有前景的钠离子电池负极材料进行了测试。采用粉末X射线衍射(XRD)和精修来分析晶体结构。在0.01 - 2.5 V之间以C/10速率进行的电化学循环测试表明,在第二个循环中可实现约83 mAh/g的容量,100次循环后保留约75%,这对应于0.75个钠的嵌入和脱出。研究并讨论了合成条件对电化学性能的影响。NaAlTiO不仅呈现出一种平均电压约为0.5 V的新型负极材料,还提供了一种晶体结构不同于已报道负极的新型嵌入型负极。