A Strategy for Breaking Polyoxometalate-based MOFs To Obtain High Loading Amounts of Nanosized Polyoxometalate Clusters to Improve the Performance of Dye-sensitized Solar Cells.

Polyoxometalates (POM) have already been confirmed to act as effective electron-transfer mediators for improving the power conversion efficiency (PCE) of dye-sensitized solar cells (DSSCs) based on previous studies. However, the improvement may be limited by the agglomeration of the polyoxoanions. In this paper, the previous synthesis strategy is improved upon by breaking the metal-organic frameworks (MOFs) with POMs as the secondary building units ([Ni(bpp)(H O) ] [P W O ]⋅24 H O (1) (bpp=1,3-bis(4-pyridyl)propane) and H [Cu (H O) (P W O ) (3-dpye) ]⋅28 H O (2) (3-dpye=N,N'-bis(3-pyridinecarboxamide)-1,2-ethane)) to design and synthesize small sized and highly disperse POM nanoparticles by means of compositing with TiO , through calcination to remove the organic ligand. TEM and element mapping confirm that P W O (denoted as P W ) nanoparticles with the diameter of ≈1 nm are uniformly distributed in TiO composites. The loading amount (wt. %) of POM in MOFs reaches 75.67 %. The small sized and highly disperse P W nanoparticles may provide more active sites and specific surface areas for improving the PCE of DSSCs. Finally, the investigations indicate that the PCE of composite P W ⋅NiO@TiO photoanodes is up to 7.56 %, which was 26 % higher than the pristine TiO based photoanodes.