Determination of disulfiram and two of its metabolites in urine by reversed-phase liquid chromatography and spectrophotometric detection after post-column complexation.

A selective method was developed for the determination of disulfiram and two of its metabolites, diethyldithiocarbamate (DTC) and copper (II) diethyldithiocarbamate [Cu(DTC)2], in complex (biological) samples by reversed-phase liquid chromatography (RP-LC) with post-column derivatization. In the first step, DTC is converted into lead (II) diethyldithiocarbamate [Pb (DTC)2] by adding lead (II) acetate. Disulfiram, Pb (DTC)2 and Cu (DTC)2 can be easily pre-concentrated on C18-bonded silica. After separation by isocratic RP-LC, derivation takes place in two solid state post-column reactors packed with metallic copper and copper (II) phosphate. Disulfiram reacts with metallic copper to form Cu (DTC)2. The same product is obtained by the ligand-exchange reaction between Pb (DTC)2 and copper (II) phosphate. Cu (DTC)2 can be detected selectively at 435 nm with good sensitivity (molar absorptivity, epsilon = 13,000). The derivatization reactions proceed rapidly and quantitatively, which was confirmed by comparison of absorption spectra. The applicability of this method is demonstrated for undiluted urine samples which, apart from the addition of lead (II) acetate and pre-concentration of C18-bonded silica, require no clean-up procedure.