From the Department of Ophthalmology (Holladay), Baylor College of Medicine, Houston, and Optics R&D Consultant (Simpson), Simpson Optics, Arlington, Texas, USA.
From the Department of Ophthalmology (Holladay), Baylor College of Medicine, Houston, and Optics R&D Consultant (Simpson), Simpson Optics, Arlington, Texas, USA.
J Cataract Refract Surg. 2017 Feb;43(2):263-275. doi: 10.1016/j.jcrs.2016.11.049.
To determine the cause of negative dysphotopsia using standard ray-tracing techniques and identify the primary and secondary causative factors.
Department of Ophthalmology, Baylor College of Medicine, Houston, Texas, USA.
Experimental study.
Zemax ray-tracing software was used to evaluate pseudophakic and phakic eye models to show the location of retinal field images from various visual field objects. Phakic retinal field angles (RFAs) were used as a reference for the perceived field locations for retinal images in pseudophakic eyes.
In a nominal acrylic pseudophakic eye model with a 2.5 mm diameter pupil, the maximum RFA from rays refracted by the intraocular lens (IOL) was 85.7 degrees and the minimum RFA for rays missing the optic of the IOL was 88.3 degrees, leaving a dark gap (shadow) of 2.6 degrees in the extreme temporal field. The width of the shadow was more prominent for a smaller pupil, a larger angle kappa, an equi-biconvex or plano-convex IOL shape, and a smaller axial distance from iris to IOL and with the anterior capsule overlying the nasal IOL. Secondary factors included IOL edge design, material, diameter, decentration, tilt, and aspheric surfaces.
Standard ray-tracing techniques showed that a shadow is present when there is a gap between the retinal images formed by rays missing the optic of the IOL and rays refracted by the IOL. Primary and secondary factors independently affected the width and location of the gap (or overlap). The ray tracing also showed a constriction and double retinal imaging in the extreme temporal visual field.
使用标准光线追踪技术确定负像性视差的原因,并确定主要和次要的致病因素。
美国德克萨斯州休斯顿贝勒医学院眼科。
实验研究。
使用 Zemax 光线追踪软件评估无晶状体和有晶状体的眼睛模型,以显示来自各种视野物体的视网膜视野图像的位置。有晶状体的视网膜视野角度(RFA)被用作无晶状体眼睛中视网膜图像感知位置的参考。
在一个标称的丙烯酸无晶状体人工晶状体眼模型中,直径为 2.5 毫米的瞳孔,折射人工晶状体(IOL)光线的最大 RFA 为 85.7 度,错过 IOL 光学部分的光线的最小 RFA 为 88.3 度,在极颞侧视野留下 2.6 度的暗区(阴影)。瞳孔越小、角kappa 越大、IOL 形状为等双凸或平面凸、虹膜到 IOL 的轴向距离越小、前囊覆盖鼻侧 IOL,阴影的宽度越明显。次要因素包括 IOL 边缘设计、材料、直径、偏心、倾斜和非球面。
标准光线追踪技术表明,当错过 IOL 光学部分的光线形成的视网膜图像与折射 IOL 的光线形成的视网膜图像之间存在间隙时,就会出现阴影。主要和次要因素独立影响间隙(或重叠)的宽度和位置。光线追踪还显示在极颞侧视野中存在收缩和双重视网膜成像。