Department of Molecular Microbiology, School of Biotechnology, Madurai Kamaraj University, Madurai 625021, Tamil Nadu, India.
Department of Genetic Engineering, School of Biotechnology, Madurai Kamaraj University, Madurai 625021, Tamil Nadu, India.
Bioresour Technol. 2017 Oct;242:128-132. doi: 10.1016/j.biortech.2017.03.067. Epub 2017 Mar 18.
In this study, the improved biomass (1.6 folds) and lipid (1.3 folds) productivities in Synechocystis sp. NN using agro-industrial wastes supplementation through hybrid response surface methodology-genetic algorithm (RSM-GA) for cost-effective methodologies for biodiesel production was achieved. Besides, efficient harvesting in Synechocystis sp. NN was achieved by electroflocculation (flocculation efficiency 97.8±1.2%) in 10min when compared to other methods. Furthermore, different pretreatment methods were employed for lipid extraction and maximum lipid content of 19.3±0.2% by Synechocystis sp. NN was attained by ultrasonication than microwave and liquid nitrogen assisted pretreatment methods. The highest FAME (fatty acid methyl ester) conversion of 36.5±8.3mg FAME/g biomass was obtained using titanium oxide as heterogeneous nano-catalyst coupled whole-cell transesterification based method. Conclusively, Synechocystis sp. NN may be used as a biodiesel feedstock and its fuel production can be enriched by hybrid RSM-GA and nano-catalyst technologies.
本研究通过采用农业工业废弃物补充的混合响应面法-遗传算法(RSM-GA),提高了聚球藻 NN 的生物质(提高 1.6 倍)和脂类(提高 1.3 倍)的生产力,从而实现了具有成本效益的生物柴油生产方法。此外,与其他方法相比,通过电絮凝(絮凝效率 97.8±1.2%)在 10 分钟内即可实现聚球藻 NN 的有效收获。此外,采用不同的预处理方法进行脂类提取,通过超声处理,聚球藻 NN 的最大脂类含量达到 19.3±0.2%,而微波和液氮辅助预处理方法的最大脂类含量分别为 17.5±0.1%和 18.3±0.2%。使用二氧化钛作为异相纳米催化剂偶联全细胞转酯化法,可获得最高的 FAME(脂肪酸甲酯)转化率 36.5±8.3mg FAME/g 生物质。总之,聚球藻 NN 可用作生物柴油原料,其燃料生产可通过混合 RSM-GA 和纳米催化剂技术得到丰富。