Okuzu Yaichiro, Goto Koji, Kawata Tomotoshi, So Kazutaka, Kuroda Yutaka, Matsuda Shuichi
1Department of Orthopaedic Surgery, Kyoto University Graduate School of Medicine, Kyoto, Japan.
J Bone Joint Surg Am. 2017 Apr 5;99(7):e31. doi: 10.2106/JBJS.16.00444.
Implantation of the acetabular cup insert in the "true" location of the acetabulum is a fundamental principle of total hip arthroplasty for the treatment of secondary osteoarthritis due to developmental dysplasia of the hip (DDH). As knowledge of the morphology of the acetabulum is required for accurate placement, we investigated the relationship between acetabular width and the Crowe classification of subluxation percentage of the hip. We also analyzed factors associated with the acetabular width ratio (AWR), defined as the acetabular width of the dysplastic hip divided by that of the unaffected, contralateral hip.
We completed a retrospective review of the preoperative standard anteroposterior radiographs and computed tomography (CT) scans of 207 female patients who underwent primary total hip arthroplasty for unilateral DDH. The "true" acetabular plane was defined on each CT reconstruction as a plane perpendicular to the anterior pelvic plane, parallel to the teardrop line, and passing through the center of the femoral head on the unaffected, contralateral side. The acetabular width was measured for both the affected hip and the contralateral, reference hip on the true acetabular plane, with the acetabular width defined as the distance between the edges of the anterior and posterior walls of the acetabulum. All hips were classified according to the Crowe groupings on the basis of the subluxation percentage of the dysplastic hip; the subluxation percentage increased from groups I to IV, with group IVb showing joint dislocation.
The acetabular width decreased from Crowe groups I to IVb, with a negative correlation found between the AWR and the subluxation percentage (Spearman correlation coefficient, ρ = -0.404; p < 0.001). Multivariate regression analysis identified subluxation percentage and femoral neck-shaft angle as independent factors associated with the AWR.
Characterization of factors associated with the AWR, namely subluxation percentage and femoral neck-shaft angle, will guide surgeons in correctly implanting the acetabular cup insert during total hip arthroplasty in patients with DDH.
在全髋关节置换术治疗发育性髋关节发育不良(DDH)继发骨关节炎时,将髋臼杯衬垫植入髋臼的“真实”位置是一项基本原则。由于准确放置需要了解髋臼形态,我们研究了髋臼宽度与髋关节半脱位百分比的Crowe分类之间的关系。我们还分析了与髋臼宽度比(AWR)相关的因素,AWR定义为发育不良髋关节的髋臼宽度除以未受影响的对侧髋关节的髋臼宽度。
我们对207例因单侧DDH接受初次全髋关节置换术的女性患者的术前标准前后位X线片和计算机断层扫描(CT)进行了回顾性分析。在每个CT重建图像上,将“真实”髋臼平面定义为垂直于骨盆前平面、平行于泪滴线且穿过未受影响的对侧股骨头中心的平面。在真实髋臼平面上测量患侧髋关节和对侧参考髋关节的髋臼宽度,髋臼宽度定义为髋臼前后壁边缘之间的距离。所有髋关节根据发育不良髋关节的半脱位百分比按照Crowe分组进行分类;半脱位百分比从I组到IV组逐渐增加,IVb组显示关节脱位。
髋臼宽度从Crowe I组到IVb组逐渐减小,AWR与半脱位百分比之间呈负相关(Spearman相关系数,ρ = -0.404;p < 0.001)。多变量回归分析确定半脱位百分比和股骨颈干角是与AWR相关的独立因素。
确定与AWR相关的因素,即半脱位百分比和股骨颈干角,将指导外科医生在DDH患者的全髋关节置换术中正确植入髋臼杯衬垫。