STELA (Dairy Science and Technology Research Centre), Institute of Nutrition and Functional Foods (INAF), Université Laval, Quebec City, QC, Canada, G1K 7P4; Centre de Recherche en Gastronomie, Institut de Tourisme et d'Hôtellerie du Québec, Montreal, QC, Canada, H2X 3P1.
Saint-Hyacinthe Research and Development Centre, Agriculture and Agri-Food Canada, 3600 Casavant Boulevard West, Saint-Hyacinthe, QC, Canada, J2S 8E3.
J Dairy Sci. 2017 Jul;100(7):5139-5152. doi: 10.3168/jds.2016-12473. Epub 2017 Apr 27.
The objectives of this study were (1) to assess the effect of a denatured whey protein concentrate (DWPC) and its fractions on cheese yield, composition, and rheological properties, and (2) to separate the direct effect of the DWPC or its fractions on cheese rheological properties from the effect of a concomitant increase in cheese moisture. Semihard cheeses were produced at a laboratory scale, and mechanical properties were characterized by dynamic rheometry. Centrifugation was used to induce a moisture gradient in cheese to separate the direct contribution of the DWPC from the contribution of moisture to cheese mechanical properties. Cheese yield increased and complex modulus (G*) decreased when the DWPC was substituted for milk proteins in milk. For cheeses with the same moisture content, the substitution of denatured whey proteins for milk proteins had no direct effect on rheological parameters. The DWPC was fractionated to evaluate the contribution of its different components (sedimentable aggregates, soluble component, and diffusible component) to cheese yield, composition, and rheological properties. The sedimentable aggregates were primarily responsible for the increase in cheese yield when DWPC was added. Overall, moisture content explained to a large extent the variation in cheese rheological properties depending on the DWPC fraction. However, when the effect of moisture was removed, the addition of the DWPC sedimentable fraction to milk increased cheese complex modulus. Whey protein aggregates were hypothesized to act as active fillers that physically interact with the casein matrix and confer rigidity after pressing.
(1) 评估变性乳清浓缩蛋白(DWPC)及其各部分对奶酪产率、组成和流变特性的影响;(2) 将 DWPC 或其各部分对奶酪流变特性的直接影响与奶酪水分含量增加的影响区分开来。在实验室规模上生产半硬质奶酪,并通过动态流变学来表征机械性能。采用离心法在奶酪中产生水分梯度,以将 DWPC 的直接贡献与水分对奶酪机械性能的贡献区分开来。当 DWPC 替代乳蛋白时,奶酪产率增加,复合模量(G*)降低。对于具有相同水分含量的奶酪,变性乳清蛋白替代乳蛋白对流变参数没有直接影响。将 DWPC 进行分级,以评估其不同成分(可沉淀的聚集体、可溶性成分和可扩散成分)对奶酪产率、组成和流变特性的贡献。当添加 DWPC 时,可沉淀的聚集体主要导致奶酪产率增加。总体而言,水分含量在很大程度上解释了根据 DWPC 级分的奶酪流变特性的变化。然而,当去除水分的影响时,将 DWPC 可沉淀部分添加到牛奶中会增加奶酪的复合模量。乳清蛋白聚集体被假设为活性填充剂,它们与酪蛋白基质物理相互作用,并在压制后赋予刚性。