Department of Materials Science and Engineering, Inha University , Incheon 22212, Korea.
School of Materials Science and Engineering, Beihang University , Beijing 100191, China.
ACS Appl Mater Interfaces. 2017 Jul 5;9(26):21791-21797. doi: 10.1021/acsami.7b04098. Epub 2017 Jun 22.
The dimensionless figure of merit, ZT, of bulk thermoelectric materials depends mainly on the transport properties of charge carriers and heat-carrying phonons. PbTe-4 mol % SrTe doped with 2 mol % Na (PbNaSrTe) is a nanostructured material system that exhibits a ZT higher than 2. The precipitate size distribution of SrTe precipitates is believed to play a key role. This raises the question of whether its performance is limited by precipitate coarsening (Ostwald ripening) at elevated temperatures. Herein, we utilize an atom-probe tomography (APT) to study the number density and mean radii of precipitates in concert with partial radial distribution functions (RDFs) of individual atoms. We find that the SrTe precipitates actually contain oxygen: SrTeO. We correlate this information with the overall ZT performance, specifically focusing on the electrical and lattice thermal conductivities after isothermal heat treatments at 300 and 400 °C for 7 days, followed by furnace cooling. Comparison of the samples annealed at 400 and 300 °C demonstrates significant coarsening of SrTeO precipitates as well as strong segregation of oxygen impurities in the SrTeO precipitates. Additionally, on the basis of the partial RDFs, the Na dopant atoms cluster with other Na atoms as well as with Pb, Te, and Sr atoms; clustering depends strongly on the annealing temperature and concomitantly affects the overall ZT values. We found that the coarsening slightly increases the lattice thermal conductivity and also increases the electrical conductivity, thereby having little or even a beneficial effect on the ZT values. Importantly, these findings demonstrate that APT enables quantitative analyses in three dimensions of the PbTe-4 mol % SrTe samples in addition to correlation of their properties with the thermoelectric performance.
块状热电材料的无量纲优值 ZT 主要取决于载流子和载热声子的输运性质。PbTe-4mol%SrTe 掺杂 2mol%Na(PbNaSrTe)是一种具有较高 ZT 值(超过 2)的纳米结构材料体系。SrTe 沉淀物的析出尺寸分布被认为起着关键作用。这就提出了一个问题,即在较高温度下,其性能是否受到沉淀物粗化(奥斯特瓦尔德熟化)的限制。在此,我们利用原子探针层析技术(APT)研究了沉淀的数密度和平均半径,以及个别原子的部分径向分布函数(RDF)。我们发现 SrTe 沉淀物实际上含有氧:SrTeO。我们将这些信息与整体 ZT 性能相关联,特别是在 300 和 400°C 下进行 7 天等温热处理后,以及随后的炉冷过程中,关注电导率和晶格热导率。对比在 400°C 和 300°C 下退火的样品,我们发现 SrTeO 沉淀物明显粗化,并且 SrTeO 沉淀物中的氧杂质严重偏析。此外,基于部分 RDF,Na 掺杂原子与其他 Na 原子以及 Pb、Te 和 Sr 原子聚类;聚类强烈依赖于退火温度,并相应地影响整体 ZT 值。我们发现,粗化略微增加了晶格热导率,也增加了电导率,因此对 ZT 值的影响很小甚至有益。重要的是,这些发现表明,APT 除了可以将其性能与热电性能相关联之外,还可以在三维空间中对 PbTe-4mol%SrTe 样品进行定量分析。