Suppr超能文献

用回旋辐射测量高温高密度铝中的离子态。

Measurements of ionization states in warm dense aluminum with betatron radiation.

机构信息

Department of Electrical and Computer Engineering, University of Alberta, Edmonton, Alberta, Canada, T6G 2V4.

INRS-EMT, Université du Québec, 1650 Lionel Boulet, Varennes, Quebéc, Canada, J3X 1S2.

出版信息

Phys Rev E. 2017 May;95(5-1):053208. doi: 10.1103/PhysRevE.95.053208. Epub 2017 May 19.

Abstract

Time-resolved measurements of the ionization states of warm dense aluminum via K-shell absorption spectroscopy are demonstrated using betatron radiation generated from laser wakefield acceleration as a probe. The warm dense aluminum is generated by irradiating a free-standing nanofoil with a femtosecond optical laser pulse and was heated to an electron temperature of ∼20-25 eV at a close-to-solid mass density. Absorption dips in the transmitted x-ray spectrum due to the Al^{4+} and Al^{5+} ions are clearly seen during the experiments. The measured absorption spectra are compared to simulations with various ionization potential depression models, including the commonly used Stewart-Pyatt model and an alternative modified Ecker-Kröll model. The observed absorption spectra are in approximate agreement with these models, though indicating a slightly higher state of ionization and closer agreement for simulations with the modified Ecker-Kröll model.

摘要

利用激光尾流加速产生的电子回旋辐射作为探针,通过 K 壳层吸收光谱实现了对温稠密铝的离子态的时间分辨测量。温稠密铝通过用飞秒光激光脉冲辐照独立的纳米箔片产生,并在接近固体密度的条件下被加热到约 20-25 eV 的电子温度。在实验过程中,由于 Al^{4+}和 Al^{5+}离子的存在,在透射 X 射线光谱中可以清楚地看到吸收陷波。测量的吸收光谱与各种电离势降低模型的模拟结果进行了比较,包括常用的 Stewart-Pyatt 模型和替代的改良 Ecker-Kröll 模型。观察到的吸收光谱与这些模型大致相符,但表明电离度略高,并且与改良 Ecker-Kröll 模型的模拟结果更为一致。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验