Chavez-Burbano Patricia, Guerra Victor, Rabadan Jose, Rodríguez-Esparragón Dionisio, Perez-Jimenez Rafael
Facultad de Ingeniería en Electricidad y Computación, Escuela Superior Politécnica del Litoral (ESPOL), Campus Gustavo Galindo Km 30.5 Vía Perimetral, P.O. Box 09-01-5863 Guayaquil, Ecuador.
Institute for Technological Development and Innovation in Communications (IDeTIC), ULPG, Las Palmas 35001, Spain.
Sensors (Basel). 2017 Jul 4;17(7):1561. doi: 10.3390/s17071561.
Due to the massive insertion of embedded cameras in a wide variety of devices and the generalized use of LED lamps, Optical Camera Communication (OCC) has been proposed as a practical solution for future Internet of Things (IoT) and smart cities applications. Influence of mobility, weather conditions, solar radiation interference, and external light sources over Visible Light Communication (VLC) schemes have been addressed in previous works. Some authors have studied the spatial intersymbol interference from close emitters within an OCC system; however, it has not been characterized or measured in function of the different transmitted wavelengths. In this work, this interference has been experimentally characterized and the Normalized Power Signal to Interference Ratio (NPSIR) for easily determining the interference in other implementations, independently of the selected system devices, has been also proposed. A set of experiments in a darkroom, working with RGB multi-LED transmitters and a general purpose camera, were performed in order to obtain the NPSIR values and to validate the deduced equations for 2D pixel representation of real distances. These parameters were used in the simulation of a wireless sensor network scenario in a small office, where the Bit Error Rate (BER) of the communication link was calculated. The experiments show that the interference of other close emitters in terms of the distance and the used wavelength can be easily determined with the NPSIR. Finally, the simulation validates the applicability of the deduced equations for scaling the initial results into real scenarios.
由于嵌入式摄像头在各种设备中的大量应用以及LED灯的广泛使用,光学相机通信(OCC)已被提出作为未来物联网(IoT)和智慧城市应用的一种实用解决方案。先前的研究已经探讨了移动性、天气条件、太阳辐射干扰和外部光源对可见光通信(VLC)方案的影响。一些作者研究了OCC系统中近距离发射器产生的空间符号间干扰;然而,尚未根据不同的传输波长对其进行表征或测量。在这项工作中,对这种干扰进行了实验表征,并提出了归一化功率信号干扰比(NPSIR),以便在其他实现中轻松确定干扰,而无需考虑所选的系统设备。在暗室中进行了一组实验,使用RGB多LED发射器和通用相机,以获得NPSIR值并验证推导的用于真实距离二维像素表示的方程。这些参数被用于模拟一个小办公室中的无线传感器网络场景,计算通信链路的误码率(BER)。实验表明,利用NPSIR可以轻松确定其他近距离发射器在距离和使用波长方面的干扰。最后,模拟验证了推导方程将初始结果扩展到实际场景的适用性。