Suppr超能文献

虚拟手术规划辅助下的咬合引导双蒂腓骨骨皮瓣游离移植用于精细下颌骨重建

Occlusion Guided Double-Barreled Fibular Osteoseptocutaneous Free Flap for Refined Mandibular Reconstruction Aided by Virtual Surgical Planning.

作者信息

Qu Xingzhou, Wang Mingyi, Xu Liqun, Liu Jiannan, Bai Shizhu, Zhang Chenping

机构信息

*The Department of Oral Maxillofacial and Head Neck Oncology in the Ninth Hospital Affiliated Shanghai Jiaotong University, Shanghai†The Department of Prosthodontics in Stomatology Affiliated the Fourth Military Medical University, Xi'an, China.

出版信息

J Craniofac Surg. 2017 Sep;28(6):1472-1476. doi: 10.1097/SCS.0000000000003841.

Abstract

BACKGROUND

There were many articles about double-barreled fibular flap for mandibular reconstruction. The upper layer bone was suit for implant placement as a new alveolar. The lower layer was necessary for contour. But the accurate relationship between the 2 layers bone was rarely reported.

OBJECTIVES

The purpose of this study was twofold: to evaluate the feasibility of the novel design of the double-barreled fibular flap from virtual surgery to actual result; to evaluate the accuracy and results of occlusion-guided double-barreled fibular free flap in mandible reconstruction.

METHODS

From 2010 to 2016, 52 patients underwent segmental mandibular reconstruction with double-barreled fibular osteoseptocutaneous flaps with computer aided design/computer aided manufacturing technique. Preoperative computer tomographic (CT) scans were imported into Mimics 10.01 software (Materialise, Leuven, Belgium) for surgical planning. The peroneal vessel pedicel was designed at the lower barrel segmental bone of the double-barreled fibular flap. The double-barreled bone was strung with 16 mm fixation screws instead of mini-plate. Sixty-three dental implants placement was simultaneous in 30 patients and 32 dental implants placement was in second stage in 18 patients. Postoperative CT and digital imaging were evaluated to assess surgical accuracy using software. The pre- and postoperative morphometric measurements were compared using the Fisher exact t test.

RESULTS

Two flaps occurred vascular crisis postoperatively. There was no flap necrosis. Four implants failed during 1 to 5 weeks postoperative. Sixty-six CT scans from 33 patients who underwent partial mandibular resection were analyzed. The dimensions of the double-barreled fibula segments after osteotomy showed no difference from the preoperative virtual surgical planning (VSP). But the condylar locations showed a disposition out of the fossa (P < 0.05), between VSP and postoperative CT scans. There was no difference in implants between VSP and postoperative CT scans.

CONCLUSIONS

The VSP of relationship of double-barreled fibular is important for segmental mandible reconstruction. The benefit of VSP was to enhance surgical accuracy and safety.

摘要

背景

有许多关于双筒腓骨瓣用于下颌骨重建的文章。上层骨适合作为新的牙槽嵴植入种植体。下层骨对塑形很有必要。但两层骨之间的精确关系鲜有报道。

目的

本研究有两个目的:评估从虚拟手术到实际结果双筒腓骨瓣新设计的可行性;评估咬合引导下双筒腓骨游离瓣在下颌骨重建中的准确性和效果。

方法

2010年至2016年,52例患者采用计算机辅助设计/计算机辅助制造技术的双筒腓骨骨皮瓣进行节段性下颌骨重建。术前计算机断层扫描(CT)图像导入Mimics 10.01软件(Materialise,比利时鲁汶)进行手术规划。腓血管蒂设计在双筒腓骨瓣的下层节段骨处。双筒骨用16毫米固定螺钉而非微型钢板固定。30例患者同期植入63颗牙种植体,18例患者分二期植入32颗牙种植体。术后使用软件通过CT和数字成像评估手术准确性。术前和术后形态测量结果采用Fisher精确t检验进行比较。

结果

术后2个皮瓣发生血管危象。无皮瓣坏死。4颗种植体在术后1至5周失败。对33例接受部分下颌骨切除患者的66次CT扫描进行分析。截骨后双筒腓骨段的尺寸与术前虚拟手术规划(VSP)无差异。但髁突位置在VSP和术后CT扫描之间显示出向关节窝外移位(P<0.05)。VSP和术后CT扫描之间种植体情况无差异。

结论

双筒腓骨关系的VSP对节段性下颌骨重建很重要。VSP的好处是提高手术准确性和安全性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验