Technical Institute of Physics and Chemistry, Chinese Academy of Sciences , No. 29 Zhongguancun East Road, Beijing 100190, China.
University of Chinese Academy of Sciences , Beijing 100049, China.
ACS Appl Mater Interfaces. 2017 Aug 30;9(34):28980-28989. doi: 10.1021/acsami.7b05809. Epub 2017 Aug 15.
Low-capacity retention is the most prominent problem of the magnesium nickel alloy (MgNi), which prevents it from being commercially applied. Here, we propose a practical method for enhancing the cycle stability of the MgNi alloy. Reduced graphene oxide (rGO) possesses a graphene-based structure, which could provide high-quality barriers that block the hydroxyl in the aqueous electrolyte; it also possesses good hydrophilicity. rGO has been successfully coated on the amorphous-structured MgNi alloy via electrostatic assembly to form the rGO-encapsulated MgNi alloy composite (rGO/MgNi). The experimental results show that ζ potentials of rGO and the modified MgNi alloy are totally opposite in water, with values of -11.0 and +22.4 mV, respectively. The crumpled structure of rGO sheets and the contents of the carbon element on the surface of the alloy are measured using scanning electron microscopy, transmission electron microscopy, and energy dispersive spectrometry. The Tafel polarization test indicates that the rGO/MgNi system exhibits a much higher anticorrosion ability against the alkaline solution during charging/discharging. As a result, high-capacity retentions of 94% (557 mAh g) at the 10th cycle and 60% (358 mAh g) at the 50th cycle have been achieved, which are much higher than the results on MgNi capacity retention combined with the absolute value reported so far to our knowledge. In addition, both the charge-transfer reaction rate and the hydrogen diffusion rate are proven to be boosted with the rGO encapsulation. Overall, this work demonstrates the effective anticorrosion and electrochemical property-enhancing effects of rGO coating and shows its applicability in the Mg-based hydrogen storage system.
低容量保持率是镁镍合金(MgNi)最突出的问题,这阻碍了它的商业应用。在这里,我们提出了一种提高 MgNi 合金循环稳定性的实用方法。还原氧化石墨烯(rGO)具有基于石墨烯的结构,可提供高质量的阻挡层以阻挡水性电解质中的羟基;它还具有良好的亲水性。rGO 通过静电组装成功地涂覆在非晶态 MgNi 合金上,形成 rGO 封装的 MgNi 合金复合材料(rGO/MgNi)。实验结果表明,rGO 和改性 MgNi 合金在水中的 ζ 电位完全相反,分别为-11.0 和+22.4 mV。使用扫描电子显微镜、透射电子显微镜和能量色散光谱法测量 rGO 片的皱缩结构和合金表面的碳元素含量。Tafel 极化测试表明,在充电/放电过程中,rGO/MgNi 体系对碱性溶液具有更高的耐腐蚀性。因此,在第 10 次循环时实现了 94%(557 mAh g)的高容量保持率,在第 50 次循环时实现了 60%(358 mAh g)的高容量保持率,远高于迄今为止我们所知的 MgNi 容量保持率与绝对值的结合结果。此外,rGO 封装被证明可以提高电荷转移反应速率和氢扩散速率。总的来说,这项工作证明了 rGO 涂层具有有效的防腐和电化学性能增强效果,并展示了其在基于镁的储氢系统中的适用性。