Electrical Properties and Interfacial Studies of HfTiO₂ High Permittivity Gate Insulators Deposited on Germanium Substrates.

In this research, the hafnium titanate oxide thin films, TiHfO₂, with titanium contents of = 0, 0.25, 0.9, and 1 were deposited on germanium substrates by atomic layer deposition (ALD) at 300 °C. The approximate deposition rates of 0.2 Å and 0.17 Å per cycle were obtained for titanium oxide and hafnium oxide, respectively. X-ray Photoelectron Spectroscopy (XPS) indicates the formation of GeO and germanate at the interface. X-ray diffraction (XRD) indicates that all the thin films remain amorphous for this deposition condition. The surface roughness was analyzed using an atomic force microscope (AFM) for each sample. The electrical characterization shows very low hysteresis between ramp up and ramp down of the Capacitance-Voltage (CV) and the curves are indicative of low trap densities. A relatively large leakage current is observed and the lowest leakage current among the four samples is about 1 mA/cm² at a bias of 0.5 V for a TiHfO₂ sample. The large leakage current is partially attributed to the deterioration of the interface between Ge and TiHfO₂ caused by the oxidation source from HfO₂. Consideration of the energy band diagrams for the different materials systems also provides a possible explanation for the observed leakage current behavior.