Institut für Physik, Johannes Gutenberg-Universität, Staudinger Weg 9, D-55099 Mainz, Germany.
J Chem Phys. 2016 Dec 7;145(21):211701. doi: 10.1063/1.4959235.
Monte Carlo simulations of homogeneous and heterogeneous nucleation in Ising/lattice gas models are reviewed with an emphasis on the general insight gained on the mechanisms by which metastable states decay. Attention is paid to the proper distinction of particles that belong to a cluster (droplet), that may trigger a nucleation event, from particles in its environment, a problem crucial near the critical point. Well below the critical point, the lattice structure causes an anisotropy of the interface tension, and hence nonspherical droplet shapes result, making the treatment nontrivial even within the conventional classical theory of homogeneous nucleation. For temperatures below the roughening transition temperature facetted crystals rather than spherical droplets result. The possibility to find nucleation barriers from a thermodynamic analysis avoiding a cluster identification on the particle level is discussed, as well as the question of curvature corrections to the interfacial tension. For the interpretation of heterogeneous nucleation at planar walls, knowledge of contact angles and line tensions is desirable, and methods to extract these quantities from simulations will be mentioned. Finally, also the problem of nucleation near the stability limit of metastable states and the significance of the spinodal curve will be discussed, in the light of simulations of Ising models with medium range interactions.
本文回顾了伊辛/格气模型中均匀成核和非均匀成核的蒙特卡罗模拟,重点介绍了关于亚稳状态衰减机制的一般见解。本文关注的是正确区分属于团簇(液滴)、可能引发成核事件的粒子与处于其环境中的粒子之间的区别,这在临界点附近是一个至关重要的问题。在远低于临界点的温度下,晶格结构导致界面张力各向异性,从而导致液滴形状非球形,即使在传统的均匀成核经典理论中,这也使得处理变得复杂。在粗化转变温度以下,得到的是具有多面体形貌的晶体,而不是球形液滴。本文讨论了从热力学分析中找到成核势垒而避免在粒子水平上识别团簇的可能性,以及界面张力的曲率修正问题。为了对平面壁上的非均匀成核进行解释,需要了解接触角和线张力的知识,并将提到从模拟中提取这些量的方法。最后,还将根据中等范围相互作用的伊辛模型的模拟,讨论亚稳状态稳定极限附近的成核问题以及旋节线的意义。