Frank Nancy, Bessaire Thomas, Tarres Adrienne, Goyon Alexandre, Delatour Thierry
a Nestlé Research Centre , Nestec Ltd ., Lausanne , Switzerland.
Food Addit Contam Part A Chem Anal Control Expo Risk Assess. 2017 Nov;34(11):1842-1852. doi: 10.1080/19440049.2017.1372640. Epub 2017 Sep 19.
The increasing number of food frauds using exogenous nitrogen-rich adulterants to artificially raise the protein content for economically motivated adulteration has demonstrated the need for a robust analytical methodology. This method should be applicable for quality control in operations covering a wide range of analyte concentrations to be able to analyse high levels as usually found in adulteration, as well as low levels due to contamination. The paper describes a LC-MS/MS method covering 14 nitrogen-rich adulterants using a simple and fast sample preparation based on dilution and clean-up by dispersive SPE. Quantification is carried out by isotopic dilution reaching LOQs of 0.05-0.20 mg/kg in a broad range of food matrices (infant formula, liquid milk, dairy ingredient, high protein meal, cereal, infant cereal, and meat/fish powder). Validation of seven commodity groups was performed according to SANCO 12571/2013, giving satisfactory results demonstrating the method's fitness for purpose at the validated range at contamination level. Method ruggedness was further assessed by transferring the developed method into another laboratory devoted to routine testing for quality control. Next to the method description, emphasis is placed on challenges and problems appearing during method development as well as validation. They are discussed in detail and solutions are provided.
越来越多出于经济动机的食品掺假行为利用外源富氮掺假物人为提高蛋白质含量,这表明需要一种强大的分析方法。这种方法应适用于涵盖广泛分析物浓度范围的质量控制操作,以便能够分析掺假中常见的高含量以及污染导致的低含量。本文描述了一种液相色谱-串联质谱法,该方法涵盖14种富氮掺假物,采用基于稀释和分散固相萃取净化的简单快速样品前处理方法。通过同位素稀释进行定量分析,在多种食品基质(婴儿配方奶粉、液态奶、乳制品成分、高蛋白膳食、谷物、婴儿谷物以及肉/鱼粉)中的定量限为0.05 - 0.20 mg/kg。根据SANCO 12571/2013对七个商品组进行了验证,结果令人满意,表明该方法在验证范围内的污染水平下适用于预期目的。通过将所开发的方法转移到另一个专门进行质量控制常规检测的实验室,进一步评估了方法的耐用性。除了方法描述外,重点还放在了方法开发以及验证过程中出现的挑战和问题上。对这些问题进行了详细讨论并提供了解决方案。