School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, Shaanxi, People's Republic of China.
Nanotechnology. 2017 Dec 1;28(48):485704. doi: 10.1088/1361-6528/aa92ac.
The size-dependent melting behaviors and mechanisms of Ag nanoparticles (NPs) with diameters of 3.5-16 nm were investigated by molecular dynamics (MD). Two distinct melting modes, non-premelting and premelting with transition ranges of about 7-8 nm, for Ag NPs were demonstrated via the evolution of distribution and transition of atomic physical states during annealing. The small Ag NPs (3.5-7 nm) melt abruptly without a stable liquid shell before the melting point, which is characterized as non-premelting. A solid-solid crystal transformation is conducted through the migration of adatoms on the surface of Ag NPs with diameters of 3.5-6 nm before the initial melting, which is mainly responsible for slightly increasing the melting point of Ag NPs. On the other hand, surface premelting of Ag NPs with diameters of 8-16 nm propagates from the outer shell to the inner core with initial anisotropy and late isotropy as the temperature increases, and the close-packed facets {111} melt by a side-consumed way which is responsible for facets {111} melting in advance relative to the crystallographic plane {111}. Once a stable liquid shell is formed, its size-independent minimum thickness is obtained, and a three-layer structure of atomic physical states is set up. Lastly, the theory of point defect-pair (vacancy-interstitial) severing as the mechanism of formation and movement of the solid-liquid interface was also confirmed. Our study provides a basic understanding and theoretical guidance for the research, production and application of Ag NPs.
采用分子动力学(MD)研究了直径为 3.5-16nm 的 Ag 纳米粒子(NPs)的尺寸相关熔化行为和机制。通过在退火过程中原子物理状态分布和转变的演化,证明了 Ag NPs 存在两种不同的熔化模式,即非预熔和具有约 7-8nm 转变范围的预熔。小 Ag NPs(3.5-7nm)在熔点前没有稳定的液壳就突然熔化,这被称为非预熔。在初始熔化之前,直径为 3.5-6nm 的 Ag NPs 通过表面吸附原子的迁移进行固态-固态晶体转变,这主要导致 Ag NPs 熔点略有升高。另一方面,直径为 8-16nm 的 Ag NPs 的表面预熔从外壳向核心传播,随着温度的升高呈现初始各向异性和后期各向同性,密排面 {111} 通过侧面消耗的方式熔化,这导致 {111} 面相对于晶面 {111} 提前熔化。一旦形成稳定的液壳,就会获得其尺寸独立的最小厚度,并建立起原子物理状态的三层结构。最后,还证实了点缺陷对(空位-间隙)切断作为固液界面形成和迁移机制的理论。我们的研究为 Ag NPs 的研究、生产和应用提供了基本的理解和理论指导。