Feasibility study of iterative model reconstruction combined with low tube voltage, low iodine load, and low iodine delivery rate in craniocervical CT angiography.

AIM

To investigate the feasibility of iterative model reconstruction (IMR) combined with low tube voltage, low iodine load, and low iodine deliver rate in craniocervical computed tomography angiography (CTA).

MATERIALS AND METHODS

Sixty patients were randomly divided into two groups (n=30 for each): group A: 120 kVp, 50 ml of iopromide at a flow rate of 5 ml/s; filtered back projection (FBP) reconstruction; group B: 80 kVp, 30 ml of iohexol at 4.5 ml/s; hybrid iterative reconstruction (HIR) for group B1 and IMR for group B2. CT attenuation values, image noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), subjective image quality, effective dose (ED), iodine load, and iodine delivery rate (IDR) were compared.

RESULTS

CT attenuation values of the arteries were higher in groups B1 and B2 than group A. The SNR and CNR were higher, while image noise was lower, for group B2 compared with groups B1 and A. The best subjective image quality was obtained with group B2. ED, iodine load, and IDR reduction of 69.6%, 51.4%, 27%, respectively, was obtained in group B compared with group A.

CONCLUSION

IMR combined with 80 kVp and 30 ml of iohexol at a flow rate of 4.5 ml/s for craniocervical CTA can reduce ED, iodine load, and IDR, while improving image quality.