Department of Physics and Atmospheric Science, Dalhousie University, Halifax, Nova Scotia, B3H 4R2, Canada.
Department of Medical Physics, Nova Scotia Health Authority, Queen Elizabeth II Health Sciences Centre, Halifax, Nova Scotia, B3H 1V7, Canada.
Med Phys. 2018 Jan;45(1):5-17. doi: 10.1002/mp.12648. Epub 2017 Nov 27.
To develop an algorithm for dynamic collimator positioning to optimize beam's eye view (BEV) fitting of targets in dynamic conformal arc (DCA)-based radiotherapy procedures, of particular use in multiple metastases stereotactic radiosurgery procedures.
A trajectory algorithm was developed to dynamically modify the angle of the collimator as a function of arc-based control point to provide optimized collimation of target volume(s). Central to this algorithm is a concept denoted herein as "whitespace" defined as any nontarget area in the BEV that is not covered by any collimation system and is open to exposure from the radiation beam. Calculating whitespace at all collimator angles and every control point, a two-dimensional topographical map depicting the tightness-of-fit of the MLC was generated. A bidirectional gradient trajectory algorithm identified a number of candidate trajectories of continuous collimator motion. Minimization of integrated whitespace was used to identify an optimal solution for the navigation of the parameter space. Plans with dynamic collimator trajectories were designed for multiple metastases targets and were compared with fixed collimator angle dynamic conformal arc (DCA) plans and standard VMAT plans.
Algorithm validation was performed on simple test cases with known solutions. The whitespace metric showed a strong correlation (R = 0.90) with mean dose to proximal normal tissue. Seventeen cases were studied using our algorithm to generate dynamic conformal arc (DCA) plans with optimized collimator trajectories for three and four target SRS patients and comparing them to DCA plans generated with optimized fixed collimator angles per arc and standard VMAT plans generated via template. Optimized collimator trajectories were found to produce a reduction in monitor units of up to 49.7 ± 5.1% when compared to VMAT across 17 patients, and all organ-at-risk and normal brain metrics were found to be superior or comparable.
Dynamic collimator trajectories have the potential to improve DCA deliveries through increased efficiency, especially in the treatment of multiple cranial metastases. Implementation of this technology should not be hindered by mechanical safety considerations as collimator motions do not modify or introduce any new risks of collisions with patients.
开发一种动态准直器定位算法,以优化基于动态弧形(DCA)的放射治疗过程中目标的视线(BEV)拟合,特别适用于多个转移立体定向放射手术过程。
开发了一种轨迹算法,以根据基于弧形的控制点动态修改准直器的角度,从而为目标体积提供最佳的准直。该算法的核心是一个在此处表示为“空白”的概念,定义为 BEV 中任何未被任何准直系统覆盖且暴露于辐射束的非目标区域。在所有准直器角度和每个控制点处计算空白,生成描绘 MLC 贴合度的二维地形图。双向梯度轨迹算法确定了连续准直器运动的多个候选轨迹。最小化积分空白用于确定参数空间导航的最佳解决方案。为多个转移靶标设计了具有动态准直器轨迹的计划,并将其与固定准直器角度动态适形弧形(DCA)计划和标准 VMAT 计划进行了比较。
在具有已知解决方案的简单测试案例中进行了算法验证。空白度指标与近端正常组织的平均剂量具有很强的相关性(R = 0.90)。使用我们的算法对 17 个病例进行了研究,为三个和四个靶标 SRS 患者生成了具有优化准直器轨迹的动态适形弧形(DCA)计划,并将其与每个弧形优化的固定准直器角度生成的 DCA 计划和通过模板生成的标准 VMAT 计划进行了比较。与 VMAT 相比,在 17 个患者中,优化后的准直器轨迹可将监测单位减少多达 49.7±5.1%,并且所有危及器官和正常大脑指标都被发现更优或相当。
动态准直器轨迹有可能通过提高效率来改善 DCA 输送,特别是在治疗多个颅转移瘤方面。由于准直器运动不会改变或引入与患者碰撞的任何新风险,因此不应因机械安全考虑而阻碍该技术的实施。