Suppr超能文献

使用骨水泥作为翻修髋关节置换术的打压植骨延伸剂。

The use of hardened bone cement as an impaction grafting extender for revision hip arthroplasty.

机构信息

School of Mechanical and Materials Engineering, University College Dublin, Belfield, Dublin 4, Ireland.

School of Mechanical and Materials Engineering, University College Dublin, Belfield, Dublin 4, Ireland.

出版信息

J Mech Behav Biomed Mater. 2018 Feb;78:82-90. doi: 10.1016/j.jmbbm.2017.11.002. Epub 2017 Nov 13.

Abstract

Impaction bone grafting is a method of restoring bone stock to patients who have suffered significant bone loss due to revision total hip surgery. The procedure requires morsellised cancellous bone (MCB) to be impacted into the site of bone loss in order to stabilise the prosthesis with the aim of long term resorption and reintegration of the impacted bone graft. Due to financial cost and the potential to transmit disease, the use of supplementary material, known as an extender, is frequently used to increase the graft material volume. This study investigates the use of hardened Hydroset (Stryker Corp, MA, USA), an injectable bone cement (IBC), as an extender material and compares the performance of the IBC in different weight percent inclusions to a commercially available bone graft extender (GCP, BoneSave, Stryker Corp, MA, USA). The surgical impaction procedure was standardised and samples were evaluated in terms of graft stiffness and height. It was observed that 30wt% IBC extended samples had significantly improved graft stiffness (p = 0.02) and no significant different in height (p = 0.067) over a 100% MCB control sample. Cyclic loading, representative of gait, found that the IBC subsided similarly to the commercial bone substitute in wt% above 10%. Shear testing of the impacted grafts showed no significant differences between GCP and IBC with impaction forces determining the shear parameters of impacted grafts. The effects of the impaction and cyclical loading procedures on extender particle sizes was assessed via particle size analysis. It was found that the IBC extended samples demonstrated reduced friability, evident in the better retention of particle size as a result of both impaction and gait representative loading compared to that of the GCP samples. This indicates a potential reduction in issues arising from small particle migration to joint surfaces. Scanning electron microscopy of the MCB particles with both GCP and IBC as extenders showed retention of the porous trabecular structure post-testing which is essential for revascularisation and bone growth into the graft.

摘要

打压植骨是一种为因翻修全髋关节手术而遭受严重骨质流失的患者恢复骨质的方法。该手术需要将松质骨颗粒(MCB)打入骨质流失部位,以稳定假体,从而实现植骨的长期吸收和再整合。由于经济成本和传播疾病的潜在风险,通常使用称为延长器的补充材料来增加移植物材料的体积。本研究调查了硬化 Hydroset(StrykerCorp,MA,USA)作为一种延长材料的使用情况,并比较了不同重量百分比包含物的 IBC 在商业上可获得的骨移植延长物(GCP,BoneSave,StrykerCorp,MA,USA)的性能。手术打压程序标准化后,根据移植物硬度和高度对样本进行评估。结果发现,在 30wt%IBC 扩展样本中,与 100%MCB 对照样本相比,移植物硬度显著提高(p=0.02),高度无显著差异(p=0.067)。具有代表性的步行周期性加载发现,在重量百分比高于 10%时,IBC 与商业骨替代物的沉降情况相似。冲击移植物的剪切试验表明,GCP 和 IBC 之间没有显著差异,冲击力决定了冲击移植物的剪切参数。通过粒度分析评估了冲击和周期性加载程序对延长剂颗粒尺寸的影响。结果发现,IBC 扩展样本的脆性降低,这在冲击和步行代表加载后,颗粒尺寸的保持更好,与 GCP 样本相比,这表明由于小颗粒迁移到关节表面而导致的问题可能会减少。使用 GCP 和 IBC 作为延长剂的 MCB 颗粒的扫描电子显微镜显示,在测试后保留了多孔小梁结构,这对于移植物的再血管化和骨生长至关重要。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验