Enevoldsen Martin V, Overgaard Jacob, Pedersen Maja S, Lindhardt Anders T
Department of Engineering, Carbon Dioxide Activation Center (CADIAC), Interdisciplinary Nanoscience centre (iNANO), Aarhus University, Hangøvej 2, 8200, Aarhus N, Denmark.
Department of Chemistry, Centre for Materials Crystallography (CMC)., Aarhus University, Langelandsgade 140, 8000, Aarhus C, Denmark.
Chemistry. 2018 Jan 24;24(5):1204-1208. doi: 10.1002/chem.201704972. Epub 2017 Dec 15.
Two protocols for the organocatalyzed decarboxylative trichloromethylation of Morita-Baylis-Hillman (MBH) substrates have been developed. Applying sodium trichloroacetate, as the trichloromethyl anion precursor, in combination with an organocatalyst and acetylated MBH-alcohols, the desired trichloromethylated products were obtained in good yields at room temperature in batch. The method was next extrapolated into a two-step continuous flow protocol, starting directly from the MBH alcohols, in combination with tributylamine acting both as base and catalyst. The flow process proved superior to the batch approach, reducing the reaction time from 16 hours to only 20 minutes, with increased yields for all investigated entries. Two examples were also taken to scale-up in flow producing more than 10 grams of both trichloromethylated targets. Finally, substitution of the organocatalyst to (DHQ) PHAL or (DHQD) PHAL induced chiral transfer to the generated stereocenter in the reaction attaining selectivities with nearly 90 % ee.
已开发出两种用于有机催化的Morita-Baylis-Hillman(MBH)底物脱羧三氯甲基化反应的方案。使用三氯乙酸钠作为三氯甲基阴离子前体,与有机催化剂和乙酰化的MBH-醇结合,在室温下以分批方式可良好产率获得所需的三氯甲基化产物。接下来,该方法被外推到两步连续流方案中,直接从MBH醇开始,同时使用三丁胺作为碱和催化剂。流动过程证明优于分批方法,将反应时间从16小时缩短至仅20分钟,所有研究的产物产率均有所提高。还采用了两个实例进行流动放大生产,两种三氯甲基化目标产物的产量均超过10克。最后,将有机催化剂替换为(DHQ)PHAL或(DHQD)PHAL会导致手性转移至反应中生成的立体中心,实现了近90%ee的选择性。