Centre for Contact Lens Research, School of Optometry and Vision Science, University of Waterloo, 200 University Avenue West, Waterloo, Ontario, N2L 3G1, Canada.
Centre for Contact Lens Research, School of Optometry and Vision Science, University of Waterloo, 200 University Avenue West, Waterloo, Ontario, N2L 3G1, Canada.
Cont Lens Anterior Eye. 2018 Apr;41(2):193-200. doi: 10.1016/j.clae.2017.12.010. Epub 2017 Dec 8.
First, to examine how wearing high and low modulus lenses with two different base curves affected lens fit, and the corneal tissue and bulbar conjunctival vascular tissue (bulbar redness and blood velocity). Secondly, to quantify the associations between these baseline and outcome variables and the third purpose was to correlate these variables with end of day comfort.
Thirty participants wore higher (PureVision (PV) 8.3, 8.6) and lower (Acuvue Advance (AA) 8.3, 8.7) modulus silicone hydrogel lenses for two weeks on a daily wear basis. Lens fitting characteristics were examined. Corneal epithelial thickness was measured and the cornea and conjunctiva were assessed. RBC velocity was estimated from high magnification bulbar conjunctival images. Subjective comfort/dryness was reported by participants using visual analogue scales.
AA lenses were rated the most comfortable (ANOVA, p=0.041). The least movement was while using the AA 8.3 base curve lens (Tukey p=0.028). Steep AA and PV lenses showed significantly higher conjunctival staining at the 2 week visit (ANOVA, p=0.029). There was a significant decrease in RBC velocity with both steeper AA lenses vs PV lenses (Tukey, p=0.001). Comparing baseline and 2 week visits, there was a significant negative correlation for the PV 8.3 between comfort and superior bulbar staining (r=-0.53). For both the PV 8.3 and AA 8.3 reduced RBC velocity was correlated with dryness (r=0.61 and r=0.91, respectively).
Physical differences in contact lenses affect structural and vascular functional aspects of the ocular surface and these may be associated with symptoms of dryness.
首先,研究两种不同基弧的高模量和低模量隐形眼镜的佩戴如何影响镜片适配度以及角膜组织和球结膜血管组织(球结膜充血和血流速度)。其次,量化这些基线和结果变量之间的相关性,第三个目的是将这些变量与一天结束时的舒适度相关联。
三十名参与者在日常佩戴的基础上,分别佩戴两周高模量(PureVision(PV)8.3、8.6)和低模量(Acuvue Advance(AA)8.3、8.7)硅水凝胶隐形眼镜。检查镜片适配特性。测量角膜上皮厚度,并评估角膜和结膜。使用高倍放大的球结膜图像估计 RBC 速度。参与者使用视觉模拟量表报告主观舒适度/干燥度。
AA 镜片的舒适度评分最高(ANOVA,p=0.041)。使用 AA 8.3 基弧镜片时,运动幅度最小(Tukey p=0.028)。两周后,陡峭的 AA 和 PV 镜片的结膜染色明显更高(ANOVA,p=0.029)。与 PV 镜片相比,使用陡峭的 AA 镜片时,RBC 速度显著降低(Tukey,p=0.001)。与基线和两周后检查相比,PV 8.3 与上球结膜染色之间存在显著负相关(r=-0.53)。对于 PV 8.3 和 AA 8.3,较低的 RBC 速度与干燥度相关(r=0.61 和 r=0.91)。
隐形眼镜的物理差异会影响眼表面的结构和血管功能方面,这些可能与干燥症状有关。