Cervera M, Dolz M, Herraez J V, Belda R
Intensive Care Unit, Dr Peset Hospital, Valencia, Spain.
Phys Med Biol. 1989 Feb;34(2):177-83. doi: 10.1088/0031-9155/34/2/002.
Eighty used and 20 new silicone, polyurethane and polyvinylchloride central venous catheters were tested to establish the Young's modulus and the bending stiffness of the catheters and their introducers. The catheters were subjected to longitudinal traction forces and their lengthening measured. Young's modulus and the geometric moment of inertia were then calculated. It is shown that polyurethane catheters show least variation in their elastic characteristics, and that silicone catheters offer least resistance to bending and do not change their elastic properties after use. All catheters were equally unlikely to cause thrombus production if this is related to excessive bending stiffness.
对80根使用过的以及20根新的硅胶、聚氨酯和聚氯乙烯中心静脉导管进行了测试,以确定这些导管及其导入器的杨氏模量和弯曲刚度。对导管施加纵向拉力并测量其伸长情况。然后计算杨氏模量和几何惯性矩。结果表明,聚氨酯导管的弹性特性变化最小,硅胶导管的抗弯曲性最小且使用后其弹性性能不变。如果血栓形成与过大的弯曲刚度有关,那么所有导管导致血栓形成的可能性相同。