Suppr超能文献

基于青凝胶的 Sb-Ni-C 三元框架均匀电极用于增强钠离子存储

Cyanogel-Enabled Homogeneous Sb-Ni-C Ternary Framework Electrodes for Enhanced Sodium Storage.

机构信息

Materials Science and Engineering Program and Department of Mechanical Engineering, The University of Texas at Austin , Austin, Texas 78712, United States.

Jiangsu Key Laboratory of New Power Batteries, Jiangsu Collaborative Innovation Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University , Nanjing 210023, China.

出版信息

ACS Nano. 2018 Jan 23;12(1):759-767. doi: 10.1021/acsnano.7b07985. Epub 2018 Jan 5.

Abstract

Antimony (Sb) represents an important high-capacity anode material for advanced sodium ion batteries, but its practical utilization has been primarily hampered by huge volume expansion-induced poor cycling life. The co-incorporation of transition-metal (M = Ni, Cu, Fe, etc.) and carbon components can synergistically buffer the volume change of the Sb component; however, these Sb-M-C ternary anodes often suffer from uneven distribution of Sb, M, and C components. Herein, we propose a general nanostructured gel-enabled methodology to synthesize homogeneous Sb-M-C ternary anodes for fully realizing the synergestic effects from M/C dual matrices. A cyano-bridged Sb(III)-Ni(II) coordination polymer gel (Sb-Ni cyanogel) has been synthesized and directly reduced to an Sb-Ni alloy framework (Sb-Ni framework). Moreover, graphene oxide (GO) can be in situ immobilized within the cyanogel framework, and after reduction, reduced graphene oxide (rGO) is uniformly distributed within the alloy framework, yielding a homogeneous rGO@Sb-Ni ternary framework. The rGO@Sb-Ni framework with optimal rGO content manifests a high reversible capacity of ∼468 mA h g at 1 A g and stable cycle life at 5 A g (∼210 mA h g after 500 cycles). The proposed cyanogel-enabled methodology may be extended to synthesize other homogeneous ternary framework materials for efficient energy storage and electrocatalysis.

摘要

锑 (Sb) 是一种重要的高容量钠离子电池负极材料,但由于其巨大的体积膨胀导致循环寿命差,实际应用受到了限制。过渡金属 (M = Ni、Cu、Fe 等) 和碳组分的共掺入可以协同缓冲 Sb 组分的体积变化;然而,这些 Sb-M-C 三元负极通常存在 Sb、M 和 C 组分分布不均匀的问题。在此,我们提出了一种通用的纳米结构凝胶辅助方法来合成均匀的 Sb-M-C 三元负极,以充分实现 M/C 双基质的协同效应。合成了氰桥联 Sb(III)-Ni(II) 配位聚合物凝胶 (Sb-Ni 氰凝胶),并将其直接还原为 Sb-Ni 合金骨架 (Sb-Ni 骨架)。此外,氧化石墨烯 (GO) 可以原位固定在氰凝胶骨架内,还原后,还原氧化石墨烯 (rGO) 均匀分布在合金骨架内,得到均匀的 rGO@Sb-Ni 三元骨架。具有最佳 rGO 含量的 rGO@Sb-Ni 骨架在 1 A g 下表现出约 468 mA h g 的高可逆容量,在 5 A g 下具有稳定的循环寿命(500 次循环后约 210 mA h g)。所提出的氰凝胶辅助方法可能会扩展到合成其他均匀的三元框架材料,以用于高效储能和电催化。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验