Demir Uygar Levent
Department of Otolaryngology and Head Neck Surgery, University of Uludag, Bursa, Turkey.
J Craniofac Surg. 2018 May;29(3):558-561. doi: 10.1097/SCS.0000000000004228.
Underrotation of the nasal tip with narrow nasolabial angle is a common nasal deformity that leads to a long nose appearance, named drooping nose. In these patients, there are various techniques described to correct droopy tip and to achieve a desirable nasal tip rotation such as lateral crural steal, lateral crural overlay, tongue-ingroove, columellar strut graft, tip rotation sutures, cephalic trimming, and others. In this study, the effects of tongue-in-groove (TIG) and columellar strut graft (CS) and the contribution of cap graft on nasal tip rotation and projection were evaluated. Twenty-eight consecutive patients who underwent open approach rhinoplasty by the same senior author (ULD) between January 2015 and December 2016 with the diagnosis of septonasal deformity and droopy nasal tip were included. In 9 of these patients nasal tip was constructed with strut graft, in 6 patients with both strut and cap grafts, in 6 patients with TIG technique and in 7 patients with both TIG and cap graft. Standardized right lateral images were taken preoperatively and 6 months postoperatively to use for further assessments. The nasal tip rotation was evaluated by measuring nasolabial angle (NLA) and the nasal projection (NP) was evaluated by using the Goode method. Finally, the postoperative values of NLA and NP at the 6th month were compared with preoperative recorded values in between groups. Each group showed increase at nasal projection; however, significance was present only in CS graft and TIG groups (P=0.011 and P=0.027 relatively). Each 4 groups showed significant increase in nasal tip rotation. In addition, the comparison of percent changes between preoperative and postoperative NP and NLA revealed no difference (P=0.56 and P=0.431 relatively). In conclusion, the authors argued that TIG and CS graft techniques are both reliable methods to correct droopy nasal tip and using additional cap graft over dome area when required is safe and useful.
鼻尖旋转不足伴鼻唇角变窄是一种常见的鼻畸形,会导致鼻子显长,即下垂鼻。对于这些患者,有多种技术可用于矫正下垂鼻尖并实现理想的鼻尖旋转,如外侧脚转移、外侧脚覆盖、舌槽法、鼻小柱支撑移植物、鼻尖旋转缝合、切除鼻翼软骨头部等。在本研究中,评估了舌槽法(TIG)和鼻小柱支撑移植物(CS)的效果以及帽状移植物对鼻尖旋转和突出度的作用。纳入了2015年1月至2016年12月期间由同一位资深作者(ULD)进行开放式鼻整形术、诊断为鼻中隔畸形和鼻尖下垂的28例连续患者。其中9例患者采用支撑移植物构建鼻尖,6例患者同时使用支撑移植物和帽状移植物,6例患者采用舌槽法,7例患者同时采用舌槽法和帽状移植物。术前和术后6个月拍摄标准化的右侧位图像用于进一步评估。通过测量鼻唇角(NLA)评估鼻尖旋转,采用古德法评估鼻突出度(NP)。最后,比较各组术后6个月时NLA和NP的测量值与术前记录值。每组的鼻突出度均增加;然而,仅在CS移植物组和TIG组有统计学意义(分别为P = 0.011和P = 0.027)。4组患者的鼻尖旋转均有显著增加。此外,术前和术后NP及NLA变化百分比的比较显示无差异(分别为P = 0.56和P = 0.431)。总之,作者认为TIG和CS移植物技术都是矫正鼻尖下垂的可靠方法,必要时在鼻尖区域使用额外的帽状移植物是安全且有效的。