School of Science and Engineering, University of Dundee, Dundee, United Kingdom.
Cavendish Laboratory, University of Cambridge, Cambridge, United Kingdom.
Appl Environ Microbiol. 2018 Mar 1;84(6). doi: 10.1128/AEM.02343-17. Print 2018 Mar 15.
Biofilm formation on abiotic surfaces in the food and medical industry can cause severe contamination and infection, yet how biological and physical factors determine the cellular architecture of early biofilms and the bacterial behavior of the constituent cells remains largely unknown. In this study, we examined the specific role of type I fimbriae in nascent stages of biofilm formation and the response of microcolonies to environmental flow shear at the single-cell resolution. The results show that type I fimbriae are not required for reversible adhesion from plankton, but they are critical for the irreversible adhesion of strain MG1655 cells that form biofilms on polyethylene terephthalate (PET) surfaces. Besides establishing firm cell surface contact, the irreversible adhesion seems necessary to initiate the proliferation of on the surface. After the application of shear stress, bacterial retention is dominated by the three-dimensional architecture of colonies, independent of the population size, and the multilayered structure could protect the embedded cells from being insulted by fluid shear, while the cell membrane permeability mainly depends on the biofilm population size and the duration of the shear stress. Bacterial biofilms could lead to severe contamination problems in medical devices and food processing equipment. However, biofilms are usually studied at a rough macroscopic level; thus, little is known about how individual bacterium behavior within biofilms and the multicellular architecture are influenced by bacterial appendages (e.g., pili/fimbriae) and environmental factors during early biofilm formation. We applied confocal laser scanning microscopy (CLSM) to visualize microcolonies at a single-cell resolution. Our findings suggest that type I fimbriae are vital to the initiation of bacterial proliferation on surfaces. We also found that the fluid shear stress affects the biofilm architecture and cell membrane permeability of the constituent bacteria in a different way: the onset of the biofilm is linked with the three-dimensional morphology, while membranes are regulated by the overall population of microcolonies.
生物膜在食品和医疗行业的无生命表面形成会导致严重的污染和感染,但生物和物理因素如何决定早期生物膜的细胞结构以及组成细胞的细菌行为在很大程度上仍然未知。在这项研究中,我们研究了 I 型菌毛在生物膜形成初始阶段的特定作用,以及微菌落对环境流动剪切力的反应在单细胞分辨率下的情况。结果表明,I 型菌毛对于从浮游生物中可逆附着不是必需的,但对于在聚对苯二甲酸乙二醇酯 (PET) 表面形成生物膜的 菌株 MG1655 细胞的不可逆附着是至关重要的。除了建立牢固的细胞表面接触外,不可逆附着似乎对于在表面启动 的增殖是必要的。在施加剪切力后,细菌的保留主要由菌落的三维结构决定,与种群大小无关,多层结构可以保护嵌入的细胞免受流体剪切的伤害,而细胞膜通透性主要取决于生物膜的种群大小和剪切力的持续时间。细菌生物膜会导致医疗器械和食品加工设备的严重污染问题。然而,生物膜通常在粗糙的宏观水平上进行研究;因此,对于个体细菌在生物膜内的行为以及多细胞结构如何受到细菌附属物(例如菌毛/菌毛)和环境因素的影响知之甚少。我们应用共焦激光扫描显微镜 (CLSM) 以单细胞分辨率可视化 微菌落。我们的研究结果表明,I 型菌毛对于细菌在表面上的增殖起始至关重要。我们还发现,流体剪切力以不同的方式影响组成细菌的生物膜结构和细胞膜通透性:生物膜的开始与三维形态有关,而膜则由微菌落的总体种群调节。