Advanced Materials Group, Materials Sciences and Technology Division, CSIR-North East Institute of Science and Technology, Jorhat 785006, India; Academy of Scientific and Innovative Research, CSIR-NEIST Campus, India.
Advanced Materials Group, Materials Sciences and Technology Division, CSIR-North East Institute of Science and Technology, Jorhat 785006, India; Academy of Scientific and Innovative Research, CSIR-NEIST Campus, India.
Chemosphere. 2018 Apr;197:817-829. doi: 10.1016/j.chemosphere.2018.01.073. Epub 2018 Feb 3.
Novel and sustainable bimetallic nanoparticles of Au-Pd on 2D graphitic carbon nitride (g-CN) and reduced graphene oxide (rGO) sheets was designed adopting an eco-friendly chemical route to obtain Au-Pd/g-CN and Au-Pd/rGO, respectively. Elimination of hazardous pollutants, particularly phenol from water is urgent for environment remediation due to its significant carcinogenicity. Considering this aspect, the Au-Pd/g-CN and Au-Pd/rGO nanocomposites are used as photocatalyst towards degradation of toxic phenol, 2-chlorophenol (2-CP) and 2-nitrophenol (2-NP) under natural sunlight and UV light irradiation. Au-Pd/g-CN nanocomposite exhibited higher activity then Au/g-CN, Pd/g-CN and Au-Pd/rGO nanocomposites with more than 95% degradation in 180 min under sunlight. The obtained degradation efficiency of our materials is better than many other reported photocatalysts. Incorporation of nitrogen atoms in the carbon skeleton of g-CN provides much better properties to Au-Pd/g-CN nanocomposite than carbon based Au-Pd/rGO leading to its higher degradation efficiency. Due to the presence of these nitrogen atoms and some defects, g-CN possesses appealing electrical, chemical and functional properties. Photoluminescence results further revealed the efficient charge separation and delayed recombination of photo-induced electron-hole pairs in the Au-Pd/g-CN nanocomposite. Generation of reactive oxygen species during photocatalysis is well explained through photoluminescence study and the sustainability of these photocatalyst was ascertained through reusability study up to eight and five consecutive cycles for Au-Pd/g-CN and Au-Pd/rGO nanocomposites, respectively without substantial loss in its activity. Characterization of the photocatalysts after reaction signified the stability of the nanocomposites and added advantage to our developed photocatalytic system.
采用环保化学路线设计了新型可持续的二维石墨相氮化碳(g-CN)和还原氧化石墨烯(rGO)片上的 Au-Pd 双金属纳米粒子,分别获得 Au-Pd/g-CN 和 Au-Pd/rGO。由于其显著的致癌性,消除水中的危险污染物,特别是苯酚,对于环境修复至关重要。考虑到这一方面,将 Au-Pd/g-CN 和 Au-Pd/rGO 纳米复合材料用作光催化剂,在自然光和紫外光照射下,分别降解有毒的苯酚、2-氯苯酚(2-CP)和 2-硝基苯酚(2-NP)。与 Au/g-CN、Pd/g-CN 和 Au-Pd/rGO 纳米复合材料相比,Au-Pd/g-CN 纳米复合材料在 180 分钟内,在阳光下的降解活性更高,降解率超过 95%。我们的材料的获得的降解效率优于许多其他报道的光催化剂。在 g-CN 的碳骨架中引入氮原子,为 Au-Pd/g-CN 纳米复合材料提供了比基于碳的 Au-Pd/rGO 更好的性能,从而提高了其降解效率。由于这些氮原子和一些缺陷的存在,g-CN 具有吸引人的电、化学和功能特性。光致发光结果进一步表明,在 Au-Pd/g-CN 纳米复合材料中,光生电子-空穴对的有效电荷分离和延迟复合。通过光致发光研究很好地解释了光催化过程中活性氧物种的产生,通过重复使用研究证实了这些光催化剂的可持续性,Au-Pd/g-CN 和 Au-Pd/rGO 纳米复合材料分别可重复使用八次和五次,而其活性没有明显损失。反应后对光催化剂的表征表明了纳米复合材料的稳定性,并为我们开发的光催化系统增添了优势。