Retarder action of isosorbide in a microemulsion for a targeted delivery of ceramide NP into the .

Ceramide [NP] is an integral component of the stratum corneum (SC) lipid matrix and is capable of forming tough and stable lamellar structures. It was proven, that in skin diseases as psoriasis or atopic dermatitis different ceramide (CER) classes, including [NP], are degraded. It is obvious that topically application of CER on impaired skin is useful for repairing the skin barrier but a tendency for low penetration due to its poor solubility in conventional dosage forms was observed. Therefore, a stable and physiologic compatible colloidal carrier system, a microemulsion (ME), was developed and characterized. The increasing knowledge of the new colloidal systems in this last decade shows their benefits in dermal application. Isosorbide (Polysorb P) was incorporated into the ME developed. It was expected that Polysorb P has a retarder potential in order to accumulate the CER in the SC, the outermost layer of the skin. Thereby the CER [NP] would be able to interact with the affected skin layers to strengthen the skin barrier. The release and penetration behavior of the CER [NP] from the ME was assessed ex vivo in a Franz diffusion cell. The results of the study showed that CER [NP] penetrate largely in the upper layers of the skin (from SC to stratum basale), which was the desired region. A recovery in the acceptor could not be detected that underlines an accumulation in upper layers. Furthermore, significantly increased values for the SC for the ME with retarder were not received. No differences in the concentrations of CER [NP] were observed. However, the toxicity of MEs was investigated using heńs egg test chorioallantoic membrane (HET-CAM). For the isosorbide-containing ME no difference was obtained in comparison to the non-containing. The results showed that both MEs are safe to be used on the skin for the controlled penetration of CER [NP] into the skin. The isosorbide had no effect on the irritating effect as well as on the penetration of the used CER.