Suppr超能文献

后路枢椎椎弓根螺钉置钉相关的枢椎后弓营养孔的解剖学研究

Anatomic Study of Nutrient Foramina of Posterior Axis with Application to C2 Pedicle Screw Placement.

机构信息

Swedish Neuroscience Institute, Swedish Medical Center, Seattle, Washington, USA.

Seattle Science Foundation, Seattle, Washington, USA; Division of Gross and Clinical Anatomy, Department of Anatomy, Kurume University School of Medicine, Kurume, Japan.

出版信息

World Neurosurg. 2018 May;113:e408-e413. doi: 10.1016/j.wneu.2018.02.043. Epub 2018 Feb 14.

Abstract

OBJECTIVE

Pedicle screws placed into C2 necessitate a thorough understanding of this bone's unique anatomy. Although multiple landmarks and measurements have been used by surgeons, these are often varied in the literature with no consensus. Herein, we studied one recently proposed landmark using the nutrient foramina of the posterior aspect of C2 for pedicle screw placement.

METHODS

On 19 (38 sides) C2 dry bone specimens, the presence, size, location, and distance from the midline of the nutrient foramina found at the junction between the isthmus and lamina were documented and measured. In addition, to discern the source of the artery entering such foramina, an injected adult cadaver was dissected.

RESULTS

The number of foramina ranged from 0-5 with a mean of 1.84. On 3 sides, no foramina were identified. The mean diameter of the foramina was 0.57 mm. The location of the foramina was at position 1 on 9.5% of sides, position 2 on 66.4% of sides, and position 3 on 24.1% of sides. The mean horizontal distance from the midline of the spinous process of C2 to the foramina was 25.17 mm. In the cadaveric specimen, the source of the artery entering these C2 nutrient foramina was found to be distal branches of the deep cervical artery.

CONCLUSIONS

We found the nutrient foramina of the C2 laminae are useful for pedicle screw placement. However, there are minor variations of the number and position of these structures. Lastly, on the basis of our study, 7.9% (n = 3) of sides will not have such foramina.

摘要

目的

置入 C2 椎弓根螺钉需要充分了解该骨独特的解剖结构。尽管外科医生已经使用了多个标志和测量方法,但这些在文献中经常有所不同,没有共识。在此,我们研究了一种最近提出的标志,即使用 C2 后侧面的营养孔来放置椎弓根螺钉。

方法

在 19 个(38 侧)C2 干骨标本上,记录并测量了在峡部和椎板交界处发现的营养孔的存在、大小、位置和距中线的距离。此外,为了辨别进入这些孔的动脉的来源,对一具注入的成人尸体进行了解剖。

结果

孔的数量范围为 0-5,平均值为 1.84。在 3 侧,未发现孔。孔的平均直径为 0.57 毫米。孔的位置在 9.5%的侧位为 1 号位置,66.4%的侧位为 2 号位置,24.1%的侧位为 3 号位置。C2 棘突中线至孔的水平距离的平均值为 25.17 毫米。在尸体标本中,发现进入这些 C2 营养孔的动脉的来源是颈深动脉的远端分支。

结论

我们发现 C2 椎板的营养孔可用于椎弓根螺钉的放置。然而,这些结构的数量和位置存在较小的变异。最后,根据我们的研究,7.9%(n=3)的侧位将没有这些孔。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验