Department of Chemical Engineering, Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh, PA 15213, USA.
Department of Chemical Engineering, University of Virginia, 102 Engineers' Way, Charlottesville, VA 22904, USA.
J Chromatogr A. 2018 Apr 20;1546:89-96. doi: 10.1016/j.chroma.2018.02.024. Epub 2018 Feb 24.
We have proposed chemical modification of Protein A (ProA) chromatography ligands with polyethylene glycol (PEGylation) as a strategy to increase the resin selectivity and robustness by providing the ligand with a steric repulsion barrier against non-specific binding. Here, we report on robustness and selectivity benefits for Repligen CaptivA PriMAB resin with ligands modified with 5.2 kDa and 21.5 kDa PEG chains, respectively. PEGylation of ProA ligands allowed the resin to retain a higher percentage of static binding capacity relative to the unmodified resin upon digestion with chymotrypsin, a representative serine protease. The level of protection against digestion was independent of the PEG molecular weight or modification extent for the PEGylation chemistry used. Additionally, PEGylation of the ligands was found to decrease the level of non-specific binding of fluorescently labeled bovine serum albumin (BSA) aggregates to the surface of the resin particles as visualized via confocal laser scanning microscopy (CLSM). The level of aggregate binding decreased as the PEG molecular weight increased, but increasing the extent of modification with 5.2 kDa PEG chains had no effect. Further examination of resin particles via CLSM confirmed that the PEG chains on the modified ligands were capable of blocking the "hitchhiking" association of BSA, a mock contaminant, to an adsorbed mAb that is prone to BSA binding. Ligands modified with 21.5 kDa PEG chains were effective at blocking the association, while ligands modified with 5.2 kDa PEG chains were not. Finally, ligands with 21.5 kDa PEG chains increased the selectivity of the resin against host cell proteins (HCPs) produced by Chinese Hamster Ovary (CHO) cells by up to 37% during purification of a monoclonal antibody (mAb) from harvested cell culture fluid (HCCF) using a standard ProA chromatography protocol. The combined work suggests that PEGylating ProA chromatography media is a viable pathway for increasing both resin lifetime and host cell impurity clearance in downstream bioprocessing.
我们提出了通过聚乙二醇(PEGylation)对蛋白 A(ProA)亲和层析配基进行化学修饰,为配基提供空间排斥屏障,以防止非特异性结合,从而提高树脂的选择性和稳健性。在此,我们报告了分别用 5.2 kDa 和 21.5 kDa PEG 链修饰的Repligen CaptivA PriMAB 树脂的稳健性和选择性优势。ProA 配基的 PEGylation 使得树脂在经糜蛋白酶消化时相对于未修饰的树脂保留更高比例的静态结合容量,糜蛋白酶是一种代表性的丝氨酸蛋白酶。对于所用的 PEGylation 化学,保护程度与 PEG 分子量或修饰程度无关。此外,发现配基的 PEGylation 降低了荧光标记的牛血清白蛋白(BSA)聚集体非特异性结合到树脂颗粒表面的程度,这可以通过共聚焦激光扫描显微镜(CLSM)观察到。随着 PEG 分子量的增加,聚集体结合的程度降低,但增加 5.2 kDa PEG 链的修饰程度没有影响。通过 CLSM 进一步检查树脂颗粒证实,修饰配基上的 PEG 链能够阻止 BSA 模拟污染物与易与 BSA 结合的吸附 mAb 的“搭便车”结合。用 21.5 kDa PEG 链修饰的配基有效阻止了这种结合,而用 5.2 kDa PEG 链修饰的配基则无效。最后,用 21.5 kDa PEG 链修饰的配基在使用标准 ProA 亲和层析方案从收获的细胞培养物上清液(HCCF)中纯化单克隆抗体(mAb)时,提高了树脂对中国仓鼠卵巢(CHO)细胞产生的宿主细胞蛋白(HCP)的选择性,最高可达 37%。综上所述,PEGylation ProA 亲和层析介质是提高下游生物加工过程中树脂寿命和宿主细胞杂质清除率的可行途径。