Yuce Meral, Capan Yilmaz
Acta Pol Pharm. 2017 Mar;74(2):357-367.
New analytical methods have been developed and validated on high performance liquid chromatography (HPLC) to assess the assay, content uniformity and dissolution of immediate release candesartan cilexetil 32 mg tablets. Method development studies were performed on cyano column. Mobile phase of assay and content uniformity test consisted of mixture of 0.05 M phosphate buffer, pH 4.5 and methanol (40 : 60, v/v) adjusted to pH 4.0 with trifluoroacetic acid, whereas mobile phase of dissolution test consisted of mixture of I mM phosphate buffer and acetonitrile (50 : 50, v/v) adjusted to pH 2.0 with trifluoroacetic acid. Mobile phases were pumped at flow rate of 1.0 mL/min, ultraviolet-visible (UV) detector was operated at 254 nm, injection volume was set at 20 μL, column temperature was held at 25⁰C. Dissolution medium was 0.05 M phosphate buffer, pH 6.5 including 0.70% (w/v) polysorbate 20. Validation studies met acceptance criteria of system suitability, specificity, linearity and range, accuracy, precision, detection limit (LOD), quantitation limit (LOQ) and robustness parameters.
已开发并验证了基于高效液相色谱(HPLC)的新分析方法,用于评估32毫克坎地沙坦酯速释片的含量测定、含量均匀度和溶出度。方法开发研究在氰基柱上进行。含量测定和含量均匀度测试的流动相由0.05 M pH 4.5的磷酸盐缓冲液和甲醇(40:60,v/v)的混合物组成,用三氟乙酸调节至pH 4.0,而溶出度测试的流动相由1 mM磷酸盐缓冲液和乙腈(50:50,v/v)的混合物组成,用三氟乙酸调节至pH 2.0。流动相以1.0 mL/min的流速泵送,紫外可见(UV)检测器在254 nm波长下运行,进样体积设定为20 μL,柱温保持在25℃。溶出介质为0.05 M pH 6.5的磷酸盐缓冲液,包括0.70%(w/v)聚山梨酯20。验证研究符合系统适用性、专属性、线性和范围、准确度、精密度、检测限(LOD)、定量限(LOQ)和稳健性参数的验收标准。