Suppr超能文献

一种快速可靠的基于 DSC 的方法,用于测定具有良好成玻璃能力的药物在介孔硅中的单分子载药量。

A fast and reliable DSC-based method to determine the monomolecular loading capacity of drugs with good glass-forming ability in mesoporous silica.

机构信息

Department of Pharmacy, University of Copenhagen, DK-2100 Copenhagen, Denmark.

Sensors, Processes and Technology, Radiometer, DK-2700 Brønshøj, Denmark.

出版信息

Int J Pharm. 2018 Jun 10;544(1):153-157. doi: 10.1016/j.ijpharm.2018.04.035. Epub 2018 Apr 18.

Abstract

The aim of this study was to introduce a fast and reliable differential scanning calorimetry (DSC)-based method to determine the monomolecular loading capacity of drugs with good glass-forming ability in mesoporous silica (MS). The proposed method is based on a solvent-free melting/fusion of drug into the MS during a heat-cool-heat cycle in the DSC. Overloaded drug-MS systems were analyzed in the DSC at different drug ratios (50, 60, 70, 80 and 90% w/w) to quantify the excess drug in the (the fraction not adsorbed to the MS surface). During the first heating, the drug will melt and fuse into the pores of the MS and upon subsequent quench cooling, the drug that is not adsorbed to the surface of the MS will amorphize into a separate phase (as drugs with good glass-forming ability do not crystallize upon quench-cooling from the melt). The drug molecules adsorbed to the MS surface are "immobilized" and will not contribute to a glass transition in the DSC and thus, the excess drug can be quantified simply by determining the change in the heat capacity over the glass transition (ΔC). Since the ΔC of overloaded samples decrease linearly with decreasing drug content, the monomolecular loading capacity of the drug in the MS can be determined by extrapolating to zero ΔC. This value corresponds to the highest drug load at which the drug is monomolecularly adsorbed to the surface of the MS and has no drug-related thermal events (glass transition), i.e. a thermodynamically stable system. Using this method, it was possible to determine the monomolecular loading capacity of four drugs with good glass-forming ability in four different MS. These determinations were in good agreement with the physical stability of the systems during an accelerated stability study, which indicates that the thermoanalytical method enabled fast and reliable determination of the monomolecular loading capacity of drugs in MS.

摘要

本研究旨在介绍一种快速可靠的差示扫描量热法(DSC),用于确定具有良好成玻璃能力的药物在介孔硅(MS)中的单分子负载能力。该方法基于在 DSC 中的热-冷-热循环中,药物在无溶剂的情况下熔融/融合到 MS 中。在 DSC 中,以不同的药物比例(50、60、70、80 和 90%w/w)分析过载药物-MS 体系,以量化(未吸附到 MS 表面的部分)过量药物。在第一次加热过程中,药物将熔融并融合到 MS 的孔中,随后在淬火冷却时,未吸附到 MS 表面的药物将非晶化为单独的相(因为具有良好成玻璃能力的药物在从熔融淬火冷却时不会结晶)。吸附到 MS 表面的药物分子被“固定”,不会在 DSC 中产生玻璃化转变,因此,通过测定玻璃化转变过程中热容的变化(ΔC),就可以简单地定量过量药物。由于过载样品的 ΔC 随药物含量的减少呈线性下降,因此可以通过外推至零 ΔC 来确定药物在 MS 中的单分子负载能力。该值对应于药物单分子吸附到 MS 表面的最高药物负载,并且没有与药物相关的热事件(玻璃化转变),即热力学稳定的系统。使用该方法,可以确定四种具有良好成玻璃能力的药物在四种不同 MS 中的单分子负载能力。这些测定结果与系统在加速稳定性研究中的物理稳定性非常吻合,这表明热分析方法能够快速可靠地确定药物在 MS 中的单分子负载能力。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验