Department of Chemical Engineering, Engineering and Technology Institute Groningen, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands.
Department of Advanced Production Engineering, Engineering and Technology Institute Groningen, University of Groningen, Nijenborgh 4, 9747AG Groningen, The Netherlands.
Carbohydr Polym. 2018 Jul 15;192:61-68. doi: 10.1016/j.carbpol.2018.03.041. Epub 2018 Mar 15.
Cu-mediated living radical polymerization (Cu-mediated LRP) was employed in this research for the synthesis of starch-g-polyacrylamide (St-g-PAM). The use of a controlled radical grafting technique is necessary, as compared to the traditional free-radical polymerization methods, in order to obtain a well-defined structure of the final product. This is in turn essential for studying the relationship between such structure and the end-properties. Waxy potato starch-based water-soluble macroinitiator was first synthesized by esterification with 2-bromopropionyl bromide in the mixture of dimethylacetamide and lithium chloride. With the obtained macroinitiator, St-g-PAM was homogeneously synthesized by aqueous Cu-mediated LRP using CuBr/hexamethylated tris(2-aminoethyl)amine (MeTren) as catalyst. The successful synthesis of the macroinitiator and St-g-PAM was proved by NMR, FT-IR, SEM, XRD and TGA analysis. The molecular weight and polydispersity of PAM chains were analyzed by gel permeation chromatography (GPC) after hydrolyzing the starch backbone. Monomer conversion was monitored by gas chromatography (GC), on the basis of which the kinetics were determined. A preliminarily rheological study was performed on aqueous solutions of the prepared materials.
本研究采用铜介导的活性自由基聚合(Cu-mediated LRP)合成淀粉接枝聚丙烯酰胺(St-g-PAM)。与传统的自由基聚合方法相比,需要使用受控自由基接枝技术,以获得最终产物的明确结构。这对于研究这种结构与最终性能之间的关系至关重要。首先通过在二甲基乙酰胺和氯化锂的混合物中与 2-溴代丙酰溴进行酯化反应,合成了基于蜡质马铃薯淀粉的水溶性大分子引发剂。使用所得到的大分子引发剂,通过水溶液中的 Cu 介导的 LRP 均匀合成了 St-g-PAM,使用 CuBr/六甲基三(2-氨基乙基)胺(MeTren)作为催化剂。通过 NMR、FT-IR、SEM、XRD 和 TGA 分析证明了大分子引发剂和 St-g-PAM 的成功合成。通过水解淀粉主链后用凝胶渗透色谱(GPC)分析 PAM 链的分子量和多分散性。通过气相色谱(GC)监测单体转化率,在此基础上确定动力学。对制备的材料的水溶液进行了初步流变学研究。