Suppr超能文献

软圆柱壳中的模式转换。

Pattern Transitions in a Soft Cylindrical Shell.

机构信息

Institute of Mechanics and Computational Engineering, Department of Aeronautics and Astronautics, Fudan University, Shanghai 200433, People's Republic of China.

Department of Mathematics, City University of Hong Kong, Hong Kong, People's Republic of China.

出版信息

Phys Rev Lett. 2018 May 25;120(21):215503. doi: 10.1103/PhysRevLett.120.215503.

Abstract

Instability patterns of rolling up a sleeve appear more intricate than the ones of walking over a rug on floor, both characterized as systems of uniaxially compressed soft film on stiff substrate. This can be explained by curvature effects. To investigate pattern transitions on a curved surface, we study a soft shell sliding on a rigid cylinder by experiments, computations and theoretical analyses. We reveal a novel postbuckling phenomenon involving multiple successive bifurcations: smooth-wrinkle-ridge-sagging transitions. The shell initially buckles into periodic axisymmetric wrinkles at the threshold and then a wrinkle-to-ridge transition occurs upon further axial compression. When the load increases to the third bifurcation, the amplitude of the ridge reaches its limit and the symmetry is broken with the ridge sagging into a recumbent fold. It is identified that hysteresis loops and the Maxwell equal-energy conditions are associated with the coexistence of wrinkle-ridge or ridge-sagging patterns. Such a bifurcation scenario is inherently general and independent of material constitutive models.

摘要

将袖子卷起来的不稳定模式比在地板上走在地毯上的不稳定模式更为复杂,两者都可以被描述为在硬基底上的单轴压缩软膜系统。这可以通过曲率效应来解释。为了研究曲面上的模式转变,我们通过实验、计算和理论分析来研究软壳在刚性圆柱上的滑动。我们揭示了一种涉及多次连续分叉的新的后屈曲现象:平滑-褶皱-脊-凹陷的转变。壳在阈值处最初以轴对称的周期性褶皱形式屈曲,然后在进一步的轴向压缩时发生褶皱到脊的转变。当负载增加到第三次分叉时,脊的幅度达到极限,并且对称性被破坏,脊凹陷成一个仰卧的褶皱。结果表明,滞后环和麦克斯韦等能量条件与褶皱-脊或脊-凹陷模式的共存有关。这种分叉情况具有内在的普遍性,与材料本构模型无关。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验