Max Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz, Germany.
European Spallation Source, Box 176, Lund 221 00, Sweden; Physical Chemistry, Lund University, Box 124, Lund 221 00, Sweden.
J Colloid Interface Sci. 2018 Nov 1;529:197-204. doi: 10.1016/j.jcis.2018.05.080. Epub 2018 May 23.
Oleosomes are stabilized by a complex outer phospholipid-protein-layer. To improve understanding of its structure and stabilization mechanism, this shell has to be studied in extracellular native conditions. This should be possible by SANS using contrast variation. Oleosomes are expected to be highly temperature stable, with molecular changes occurring first in the protein shell. Direct measurements of changes in the shell structure are also important for processing methods, e.g. encapsulation.
Extracted soybean oleosomes were studied directly and after encapsulation with pectin by SANS using contrast variation. In order to determine structure and size, a shell model of oleosomes was developed. The method was tested against a simple phospholipid-stabilized emulsion. The oleosomes' temperature stability was investigated by performing SANS at elevated temperatures.
Size (R = 1380 Å) and shell thickness of native and encapsulated oleosomes have been determined. This is the first report measuring the shell thickness of oleosomes directly. For native oleosomes, a shell of 9 nm thickness surrounds the oil core, corresponding to a layer of phospholipids and proteins. Up to 90 °C, no structural change was observed, confirming the oleosomes' high temperature stability. Successful coavervation of oleosomes was shown by an increase in shell thickness of 10 nm after electrostatic deposition of pectin.
油体是由复杂的外层磷脂-蛋白层稳定的。为了更好地了解其结构和稳定机制,必须在细胞外的天然条件下研究这种外壳。这可以通过使用对比变化的小角中子散射 (SANS) 来实现。油体具有很高的温度稳定性,分子变化首先发生在蛋白质外壳中。外壳结构的直接测量对于加工方法(例如封装)也很重要。
使用 SANS 通过对比变化直接研究了提取的大豆油体以及用果胶封装后的油体。为了确定结构和大小,开发了油体的外壳模型。该方法针对简单的磷脂稳定乳液进行了测试。通过在升高的温度下进行 SANS 研究来研究油体的热稳定性。
确定了天然和封装的油体的大小(R=1380Å)和外壳厚度。这是首次直接测量油体外壳厚度的报告。对于天然油体,油核周围有 9nm 厚的外壳,对应于一层磷脂和蛋白质。在 90°C 以下,没有观察到结构变化,证实了油体的高温度稳定性。通过静电沉积果胶后壳厚度增加 10nm,成功地保护了油体。