Karimi Alireza, Razaghi Reza
Department of Mechanical Engineering, Kyushu University, Fukuoka 819-0395, Japan.
Basir Eye Health Research Center, Tehran, Iran.
Technol Health Care. 2018;26(6):963-972. doi: 10.3233/THC-181340.
The mechanical functions of the lungs are concerned with ventilating the alveoli and aiding venous return to the heart. The mechanical properties of the lung allow this to be fulfilled with a very small expenditure of energy. Smoking via chronic obstructive pulmonary disease (COPD) can affect this mechanical function through the alteration of the mechanical properties of the lung tissue. So far, no study has been conducted to experimentally compare the in vitro mechanical properties of the human lung tissue among the healthy nonsmokers and unhealthy smokers. Therefore, there is a paucity of knowledge on how the macro-mechanical properties of the lung tissue as a consequence of at least 7 years of smoking can alter. This study was, hence, aimed at performing a comparative study to compare the linear elastic and nonlinear hyperelastic mechanical properties of the healthy nonsmokers and unhealthy smokers' lung using uniaxial tensile testing under two different loading directions, i.e., the axial and transversal. To do that, the COppm (Carbon Monoxide part per million) and %COHb (blood Carboxyhemoglobin) of 18 cadaveric individuals, including 9 nonsmokers and 9 smokers were measured. The COppm and %COHb were found to be 26 ± 1.58 (Mean ± SD) and 4 ± 1.16 for the smokers and 4.79 ± 0.25 and 1.27 ± 0.16 for the nonsmokers, respectively. The lung tissues were excised from the cadavers and mounted on the uniaxial tensile test machine under the loading rate of 5 mm/min. The stress-strain data of the tissues revealed the axial elastic modulus of 58 ± 4.21 and 142 ± 8.84 kPa for the nonsmokers and smokers' lungs, respectively. Similarly, the transversal elastic modulus of 53 ± 7.16 and 127 ± 11.15 kPa were found for the nonsmokers and smokers' lungs, respectively. The results revealed a significant difference between the axial and transversal mechanical properties of the nonsmokers and smokers' lung tissues (p< 0.05, post hoc Scheffe method). The hyperelastic material coefficients of the lung tissues were also calculated and reported. These findings have implications not only for understanding the role of smoking on the mechanical properties of the lung tissue but also to give rise to novel therapeutic strategies for the management of the disease and prevention of smoking addiction.
肺的机械功能与肺泡通气以及辅助静脉血回流至心脏有关。肺的机械特性使得这一功能能够以极小的能量消耗得以实现。吸烟通过慢性阻塞性肺疾病(COPD)会改变肺组织的机械特性,进而影响这种机械功能。到目前为止,尚未有研究通过实验比较健康非吸烟者和不健康吸烟者的人体肺组织的体外机械特性。因此,对于至少7年吸烟史导致的肺组织宏观机械特性如何改变,人们知之甚少。因此,本研究旨在进行一项比较研究,通过在轴向和横向两个不同加载方向上进行单轴拉伸试验,比较健康非吸烟者和不健康吸烟者肺的线性弹性和非线性超弹性机械特性。为此,测量了18具尸体的一氧化碳百万分率(COppm)和血液碳氧血红蛋白百分比(%COHb),其中包括9名非吸烟者和9名吸烟者。吸烟者的COppm和%COHb分别为26±1.58(平均值±标准差)和4±1.16,非吸烟者分别为4.79±0.25和1.27±0.16。从尸体上切下肺组织,以5毫米/分钟的加载速率安装在单轴拉伸试验机上。组织的应力-应变数据显示,非吸烟者和吸烟者肺的轴向弹性模量分别为58±4.21和142±8.84千帕。同样,非吸烟者和吸烟者肺的横向弹性模量分别为53±7.16和127±11.15千帕。结果显示,非吸烟者和吸烟者肺组织的轴向和横向机械特性之间存在显著差异(p<0.05,事后Scheffe法)。还计算并报告了肺组织的超弹性材料系数。这些发现不仅有助于理解吸烟对肺组织机械特性的作用,还能为该疾病的管理和吸烟成瘾的预防带来新的治疗策略。