School of Materials Science and Nanotechnology, Jadavpur University, Kolkata-700032, India.
Dalton Trans. 2018 Sep 11;47(35):12228-12242. doi: 10.1039/c8dt02227e.
Feeble white emission with a low Colour Rendering Index (CRI) has become the principal gridlock for the extensive commercialization of phosphor converted white LEDs (pc-WLEDs). Fusion of red, green and blue emitting rare-earth (RE) ions in a suitable host can overcome these drawbacks but the energy migration between multiple RE ions at single excitation wavelength defines the key standpoint in designing such white light emitting phosphors. Apart from the abovementioned obstacles, recently traditional optical temperature sensors based on RE ions have faced difficulties due to their low relative sensitivity and large detection error. Keeping these points in mind, in this work, a series of MgAl2O4:Dy3+,Eu3+ nanophosphors are synthesized among which 2% Dy3+,0.2% Eu3+ doped MgAl2O4 nanophosphors demonstrate strong white emission with CIE co-ordinates of (0.31, 0.33), and high quantum yield (∼67%), which could be directly utilized for pc-WLED based solid state lighting devices. Detailed investigation of PL properties reveals that Eu3+ ions can be well sensitized by Dy3+ under near-ultraviolet excitation of 351 nm. Dexter's theory & Reisfeld's approximation are employed for an in-depth analysis of the inter-RE energy transfer (ET) mechanism, which signposts that the dipole-quadrupole interaction phenomenon is responsible for the ET process from Dy3+ to Eu3+. Additionally, the validated ET plays a pivotal role in demonstrating the self-referencing ratiometric temperature sensor behaviour supported by a distinct high temperature thermal quenching trend between Dy3+ and Eu3+ ions. Hence the obtained nanophosphors are highly promising for utilizing in WLED based solid state lighting and self-referencing ratiometric temperature sensor applications.
弱的白光发射和低显色指数(CRI)已经成为磷光转换白光 LED(pc-WLED)广泛商业化的主要障碍。在合适的基质中融合发红、绿、蓝发射稀土(RE)离子可以克服这些缺点,但在单一激发波长下多个 RE 离子之间的能量迁移定义了设计这种白光发光荧光粉的关键。除了上述障碍外,最近基于 RE 离子的传统光学温度传感器由于其相对灵敏度低和检测误差大而面临困难。考虑到这些要点,在这项工作中,合成了一系列 MgAl2O4:Dy3+、Eu3+纳米荧光粉,其中 2%Dy3+、0.2%Eu3+掺杂的 MgAl2O4 纳米荧光粉表现出强的白光发射,CIE 坐标为(0.31,0.33),量子产率高(约 67%),可直接用于基于 pc-WLED 的固态照明器件。详细的光致发光(PL)性质研究表明,Eu3+离子可以在 351nm 的近紫外激发下被 Dy3+很好地敏化。德克斯特理论和赖斯菲尔德近似被用于深入分析 RE 间能量转移(ET)机制,这表明偶极-四极相互作用现象是 Dy3+到 Eu3+的 ET 过程的原因。此外,验证的 ET 在证明自基准比率温度传感器行为方面起着关键作用,这是由 Dy3+和 Eu3+离子之间明显的高温热猝灭趋势支持的。因此,所获得的纳米荧光粉非常有希望用于基于 WLED 的固态照明和自基准比率温度传感器应用。